San Antonio Alc/Nwk/Bldg 1420, 413 N. Luke Dr., Kelly Afb Tx 78241-5314

11 -- LIFT CYLINDER/CONNECTING LINK SOL F41608-96-Q-41043 DUE 061396 POC For copy, Fax request to NWK at (210)925-9776, For additional information contact Ball, B. 1lt/Nwk/210-925-4482 Item 0001 NSN 1190-01-274-8504CM P/N: 090003, Form: Lift Cylinder, Connecting Link Support Fixture is a steel frame weldment that attaches to the trailer lift cylinders and/or connecting links. Fit: Lift Cylinder, Connecting Link Support Fixture is approx 48''L X 30''W X 24.50''H and weighs appproximately 387 pounds. Function: Lift Cylinder, Connecting Link Support Fixture aids in mounting the trailer lift cyliner and connecting links onto the MHU-196/M and MHU-204/M Munitions Handling Trailers. Predominate Material: Steel Weldment. Other Info: AFLC/AFCS Form 2 applies. 2EA. Applicable to: Mhu-196/M. Destn: SA-ALC/FD2388. Delivery: 15 Jan 97 2 ea Item 0002 NSN 1190-01-231-3620CM Front Wheel Bogie Handling Fixture P/N: 090001, Form: Handling Fixture, Front Wheel Bogie, is a steel frame weldment that attaches to the center of teh forward and aft ends of the wheel motor mount. Fit: Handling Fixture, Front Wheel Bogie, is approx 45''L X 28''W X 34''H and weighs approximately 312 pounds. Function: Handling Fixture, Front Wheel Bogie, aids in mounting the trailer front wheel bogie onto the MHU-196/M and MHU-204/M Munitions Handling Trailers. Predominate Material: Steel Weldment. 2EA. Applicable to: Mhu-196/M. Destn: SA-ALC/FD2388. Delivery: 15 Jan 97 2 ea Item 0003 NSN 1190-01-217-7338CM Fixture, Handling Rear Wheel P/N: 090002, Form: Rear Wheel Yoke Assembly Handling Fixture is a steel frame weldment that attaches to the trailer rear wheel yokes. The fixture is attached using rear wheel support assembly mounting hardware. Fit: Rear Wheel Yoke Assembly Handling Fixture is approx 26''L X 32''W X 35.75''H and weighs approximately 182 pounds. Function: Rear Wheel Yoke Assembly Handling Fixture aids in mounting the rear wheel yokes onto the MHU-196/M and MHU-204/M Munitions Handling Trailers. Predominate Material: Steel Weldment. 2EA. Applicable to: Mhu-196/M. Destn: SA-ALC/FD2388. Delivery: 15 Jan 97 2 ea Item 0004 NSN 1190-01-217-1101CM Jack Cylider, Handling Fixture P/N: 8566456, Form: Jack Cylinder Handling Fixture is a rounded steel plate which attaches to the trailer jack tubes. The plate has a solid lifting ring attached so that a hoist or similar lifting device can be used to lift the jack tubes for installation/removal. Fit: Jack Cylinder Handling Fixture is approx 12.75''D X 1.56T X 5.56H and weighs approximately 70 pounds. Function: Jack Cylinder Handling Fixture aids in mounting the jack tubes (front and rear) into the MHU-19/M and MHU-204/M Munitions Handling Trailers. Predominate Material: 4130 Steel, Finish is Black Oxide Coating. 1EA. Applicable to: Mhu-196/M. Destn: SA-ALC/FD2388. Delivery: 15 Jan 97 1 ea Government furnished drawings and specifications are available. The approximate issue/response date will be 14 May 96. The anticipated award date will be 28 Jun 96. Written procedure will be used for this solicitation. To: Enginetics Corporation, Huber Heights Oh 45424-0449. No telephone requests. Only written or faxed requests received directly from the requestor are acceptable. All responsible sources solicited may submit a bid, proposal, or quotation which shall be considered. (0116)

Loren Data Corp. http://www.ld.com (SYN# 0261 19960426\11-0001.SOL)