MK Ferguson Company, 7295 Highway 94 South, St. Charles, Missouri 63304

39 -- QUALIFIED SOURCES SOUGHT TO PROVIDE SHOP FABRICATED SILOS, BINS AND DUST COLLECTORS SOL RFP-3589-04. POC Brian L. Claytor, (314) 441-8086, extension 3703. Qualified Sources Sought, SOL RFP 3589-04. MK Ferguson Company (MK-F), is currently performing work under a Department of Energy Prime Contract at the Weldon Spring Site Remedial Action Project (WSSRAP) located in St. Charles, Missouri. Qualified sources are being sought for the supply of Shop fabricated Silos, Bins and Dust Collectors to be used in the construction of a Chemical Stabilization/Solidification (CSS) Plant. Interested qualified parties should have the ability to provide equipment in compliance with design/hard specifications and stringent quality control procedures. Following is a brief description of the equipment anticipated to be required under the procurement action. SHOP FABRICATED SILOS, BINS, AND DUST COLLECTORS: This is a procurement for four (4) shop fabricated silos and bins, and six (6) cartridge filter dust collectors. The shop fabricated silos and bins are required to store class C fly ash and/or Portland cement. All units are conical bottom, including vibrating bin activators, and are supported on structural legs. Two units are 14-foot diameter by 32-foot shell length and are designed for operation at 15 PSIG operating pressure. Two units are 14-foot diameter by 14-foot shell length, and are designed for atmospheric operation. Units contain various welded nozzles and appurtenances including caged ladders, and must be shipped fully assembled to the extent possible. Material of construction is mild steel. The cartridge filter dust collectors with 99-percent efficiency of 0.5 micron dust particle size are required. Four of the units include hoppers and the remaining two mount directly to the silos they serve. Capacities vary between 1000 and 5000 SCFM. Casing pressure is 15 PSIG on the direct mounted units and 30 inches of mercury on the stand alone units. Two of the stand alone units include the associated blowers. The filters must be designed for reverse pulsing. Estimated magnitude of this procurement is between $500K and $1M (SIC CODE 3448). Suppliers interested in the above noted equipment package should submit, by May 10, 1996, a letter requesting a copy of the proposal package, to: MK-Ferguson Company, 7295 Highway 94 South, St. Charles, Missouri 63304, ATTN: Brian L. Claytor. (115)

Loren Data Corp. http://www.ld.com (SYN# 0193 19960429\39-0003.SOL)