|
COMMERCE BUSINESS DAILY ISSUE OF MAY 2,1996 PSA#1586Directorate Of Contracting, Oo-Alc 6050 Gum Lane/Bldg 1215, Hill Air
Force Base, Ut 84056-5825 16 -- KEY ROTOR DRIVE SOL F42630-96-R-68242 DUE 061996 POC For copy,
PKX-2/Pamala Chaffee/(FAX)801-777-7522, For additional information
contact Landing Gear/Photo/Likl/(801)777-6501 Item 0001 NSN
1630-01-083-0324 P/N: 2606039, P/N 205-01900 Wheel half assy.
Predominate material: steel. Rotor drive key drives the brake on the
wheel. Has a 5'' dia pin 1.75'' in length. Holds the heat shield in
place. 5184ea. Applicable to: F15. Destn: Hill Air Force Base, Ut
84056-5825. Delivery: 31 Oct 96 3425 ea 31 Jan 97 1759 ea The
approximate issue/response date will be 20 May 96. To: Parker-Hannifin
Corp, Avon Oh 44011-1297. To: Allied Signal Inc, South Bend In
46628-1373. No telephone requests. Only written or faxed requests
received directly from the requestor are acceptable. All responsible
sources solicited may submit a bid, proposal, or quotation which shall
be considered. Authority: 10 U.S.C. 2304(C)(1), Justification:
Supplies (or Services) required are available from only one or a
limited number of responsible source(s) and no other type of supplies
or services will satisfy agency requirements. The proposed contract
action is for supplies and services for which the Government intends to
solicit and negotiate with only one, or a limited number of sources
under the authority of FAR 6.302. Interested persons may identify their
interest and capability to respond to the requirement or submit
proposals. This notice of intent is not a request for competitive
proposals. However, all proposals received within forty-five days
(thirty days if award is issued under an existing basic ordering
agreement) after date of publication of this synopsis will be
considered by the Government. A Determination by the Government not to
compete this proposed contract based upon responses to this notice is
solely within the discretion of the Government. Information received
will normally be considered solely for the purpose of determining
whether to conduct a competitive procurement. It is suggested that
small business firms or others interested in subcontracting
opportunities in connection with the described procurement make contact
with the firm(s) listed. Specifications, plans, or drawings relating to
the procurement described are incomplete or not available and cannot be
furnished by the Government. Requests for copies of solicitations must
reference the entire solicitation number, including purchasing office
identification number. To expedite your request, limit the number of
individual solicitation numbers requested per letter to not more than
10. Don't request information on this requirement until after the issue
date. An Ombudsman has been appointed to hear concerns from offerors or
potential offerors during the proposal development phase of this
acquisition. The purpose of the Ombudsman is not to diminish the
authority of the program director or contracting officer, but to
communicate contractor, concerns, issues, disagreements, and
recommendations to the appropriate government personnel. When
requested, the Ombudsman will maintain strict confidentiality as to the
source of the concern. The Ombudsman does not participate in the
evaluation of proposals or in the source selection process. Interested
parties are invited to call Jack S. Jones if your concerns are not
satisfied by the contracting officer (801)777-6991. Beginning May 1996,
Ogden Air Logistics Center/PK (00-ALC/PK), Hill Air Force Base, Utah
will begin a ''phase in'' process, distributing drawings associated
with solicitation packages on CD ROM. Aircraft, Commodities and Missile
Procurements will be affected. The ''phase in'' process will be by NSN.
During this period data may be available on CD-ROM, Floppy Disk, or
aperature cards. CD-ROM is the medium of preference. After SEP 1996
data available by CD-ROM will gradually increase. The minimum set-up
requirements to view the drawings supplied by OO-ALC areas follows: 386
INTEL 33MHZ processor or higher; 8 MEGABYTES RAM; Any size hard drive;
CD ROM reader (1X, 2X OR 4X); 14'' color monitor (17'' is recommended)
DOS 5.0 or higher; windows 3.1 or higher, UNZIP software. To provide
comments please contact Brad Bennett (801)777-0889 by 15 April 1996.
For technical information please contact Kim Call at 801-777-6225.
Limited or Rightsguard Data will be provided on aperature cards until
further notice. (0121) Loren Data Corp. http://www.ld.com (SYN# 0221 19960501\16-0002.SOL)
16 - Aircraft Components and Accessories Index Page
|
|