92d Contracting Squadron, 100 W. Ent Street (Suite 200), Fairchild AFB, WA 99011-9403

67 -- CLOSED CIRCUIT TELEVISION SYSTEM SOL F4561396Q0739 DUE 061196. Contact Betty White, Purchasing Agent, 509/247-3837; Contracting Officer, Laurie Whelan, 509/247-3859. For purchase of closed circuit television system to be installed in the Fairchild AFB Youth Center. Minimum specifications are: (1) The system must have at least 20 cameras and the ability to monitor all cameras through a central controller; map for camera placement will be furnished. Each camera should be CCD, Color, and have a minimum scan area of 500 x 482. Each camera should be capable of C or CS mount lenses and support an auto iris adjustment. The video output is to be 1.0 VPP composite video that is NTSC or EIA standard, the output connector should be a BNC. Cameras should have iris level, peak and v-phase adjustments and be mounted in such a position that ambient light from windows/doors will not interfere with image quality. (2) Exterior environmental housing, five recommended, must have internal heaters and be air/water tight enclosures; interior protective cages at least four, must protect against abuse. All cameras must include appropriate mounting system to adequately point and support each camera. (3) Monitoring of any one camera or all cameras at any one time is required. Separate recording ability is also required. Multiplexer with variable display, i.e. 1, 2x2, 3x3, 4x4 etc, is recommended and must have a method of supporting all 20 cameras either through a single or multiple multiplexers. (4) Video cassette recorders must have the ability for real time recording for an optimum of 24 hour range. Play back on same VCR is required; VHS format is recommended. (5) Monitors should be color with a resolution of at least 450 lines and a ceiling mounted is required. Diagonal length of 17 inches is recommended. (6) Multiplexer inputs need to be BNC connectors and capable of operating with 1.0 VPP composite video signal with 75 Ohm termination. Color capable is required. Map of required camera placement and maps of the building's existing lighting and power outlets will be furnished upon request. There can be no installation of exposed conduit or wiring. Contractor must furnish all cabling, wiring, connectors, etc. This proposed procurement is 100% set-aside for small business. Simplified acquisition procedures will be used. (127)

Loren Data Corp. http://www.ld.com (SYN# 0411 19960509\67-0001.SOL)