US ARMY ENGINEERING & SUPPORT CENTER

69 -- PLASTIC CUT MUNITIONS FOR SETH SOL DACA87-96-R-0033 DUE 053196 POC Contact Richard H. Cates, (205)895-1154/Contracting Officer, Virginia C. Thompson, (205)895-1121 (Site Code DACA87) The U.S. Army Engineering and Support Center, Huntsville, intends to issue a solicitation for Plastic Cut Munitions for Simulated Equipment Test Hard- ware (SETH) in support of the Chemical Demilitarization Program. The proposed procurement is for the acquisition of plastic simulated munitions for training and public display purposes. The simulated munitions require- ment consist of an initial requirement of sets of the following munitions: (1) 105mm M60, 1 set; (2) 105mm M360, 3 sets; (3) 4.2-inch M2/A1 M, 3 sets; (4) 155mm M110, 1 set; (5) 155mm M121A1, 5 sets; (6) 8-inch M426, 5 sets; (7) Bomb MC1, 1 set; (8) Bomb MK94, 1 set; (9) Bomb MK116, with Overpak and Furnace Cradle, 3 sets; (10) Spray Tank, with Overpak and Furnace Cradle, 3 sets; (11) Ton Container, 7 sets; (12) M55 Rocket (Full Scale), 8 sets; (13) M55 Rocket (Half Scale), 8 sets; and (14) On-Site Containers (Truck, Internals, and Miniatures), 12 sets. Delivery and set-up is required for the Tooele and Anniston sites 25 February 1997, and for the other siteson or before 19 August 1997. Additional optional requirements of various quantities in a range of zero to forty-three sets each of the following munitions may also be required over the following four year period: (1) 105mm M60, 0-11 Range; (2) 105mm M360, 0-9 Range; (3) 4.2-inch M2/A1, 0-11 Range; (4) 155mm M110, 0-13 Range; (5) 155mm M121A1, 0-11 Range; (6) 8-inch M426, 0-11 Range; (7) Bomb MC1, 0-9 Range; (8) Bomb MK94, 0-9 Range; (9) Bomb MK116, 0-14 Range; (10) Spray Tank, 0-14 Range; (11) Ton Container, 0-18 Range; (12) M55 Rocket, 0-38 Range; (13) On-Site Containers (Working), 0-43 Range; (14) On-Site Containers (See-through), 0-35 Range; and (15) On-Site Containers (Sectioned), 0-21 Range. Requirements will be delivered to one or more of the following sites: (1) Tooele Army Depot, Utah; (2) Anniston Army Depot, Alabama; (3) Umatilla Army Depot, Oregon; (4) Pine Bluff Army Arsenal, Arkansas; and (5) Aberdeen Proving Ground, Maryland. These requirements will be used to support the indoctornation and training of employees and the general public in the disposal of chemical agent munitions. Delivery will be F.O.B. Destination. The Standard Industrial Code applicable to this procurement is 3089. All responsible sources may submit a proposal which shall be considered by the Agency. See notes 1 and 26.(0131)

Loren Data Corp. http://www.ld.com (SYN# 0386 19960513\69-0001.SOL)