|
COMMERCE BUSINESS DAILY ISSUE OF JUNE 4,1996 PSA#1608Naval Undersea Warfare Center Division, Newport Commercial Acquisition
Department, Code 59, 1176 Howell Street, Newport, RI 02841-1708 70 -- SIGNAL PROCESSING BOARDS SOL N66604-96-R-B753 DUE 062896 POC
Contact Elaine Medeiros, Contracting Officer at (401) 841-2442 X282
FAX: (401) 841-4820 The Naval Undersea Warfare Center Division,
Newport, Rl, synopsized requirement in the CBD dated 3/25/96 and
modified in, the CBD dated 5/20/96 for a 100% Small Business Setaside,
Firm Fixed Price (Supply) contract, solicited on a brand name or equal
basis, for a quantity of 20 each is being modified to include an
additional contract line item number: 0003 Option 1 - Spectrum Octal
TMS 320C40 Signal Processing Board, 8 each, with Two-Year Warranty,
consisting of: One each TMS 320C40 Motherboard, Spectrum Signal
Processing Model No. CV4-600-01590. Four each Dual TMS 320C40 Texas
Instrument Modules, P/N 600-02144. 0004 Development Software and
Emulation Support, 1 lot. SALIENT CHARACTERISTICS/CONFIGURATION
REQUIREMENTS: 0001 VME Motherboard --Implemented on a single slot, 6U
VME card. --Configured with eight (8) Texas Instruments TMS 320C40, 50
MHz digital signal processors (DSP) configured on 4 Texas Instruments
modules (TIMs). --Provides interrupt synchronization between
processors. --Minimum of two communications ports per pair of C40
processors routed to the front panel. --Equipped with 32K x 8 bit
EEPROM to provide program and boot capability and Module-ID. --Allows
external synchronization with a pulse TTL waveform with a minimum pulse
width of 1 microsec. --Equipped with a minimum of 64K x 32 bit 0
wait-state Static Random Access Memory. --Must provide a JTAG scan path
to the front panel. --Capable of being reset from the front panel
without resetting the VME bus backplane. The following Analog and
Digital Input/Output capabilities must be implemented on the
motherboard or an attached daughterboard such that the single width VME
requirements stated above are maintained: --Each pair of TMS 320C40
processors must be provided a minimum 14 bit, 250 kHz Analog to Digital
Converter (ADC) and 12 bit, 100 kHz Digital to Analog Converter (DAC).
--The ADC must Maintain 80 dB of dynamic range through to the DSP's.
--The ADC oscillator must have a selectable source from either a C4O
timer onboard programmable oscillator, or an External oscillator (P2
connector). --Both the ADC and DAC must have a dedicated path to the
pair of DSP's. They must not be routed through a data bus or
communications port which is common to outside memory or the VME bus.
0002 Development Software and Emulation Support; the vendor must
provide: --Driver software compatible with Force 2CE controller (SUNOS
4. 1.3). --C callable library, which includes standard control
software allowing interruption and resetting of each C40, downloading
of executable code and data, and uploading of data. --Full TI DB40
debugging capabilities via the SUN SPARC controller with no external
emulation hardware required. Delivery required 60 Days after award of
contract. FOB Destination at NUWC Division, Newport, RI. See Note 1.
SIC Code 3577, 1,000 Employees. (0152) Loren Data Corp. http://www.ld.com (SYN# 0298 19960603\70-0002.SOL)
70 - General Purpose ADP Equipment Software, Supplies and Support Eq. Index Page
|
|