Directorate Of Contracting, Oo-Alc 6050 Gum Lane/Bldg 1215, Hill Air Force Base, Ut 84056-5825

16 -- NUT AXLE SOL F42630-96-Q-69806 DUE 072396 POC For copy, PKX-2/Pamala Chaffee/(FAX)801-777-7522, For additional information contact Landing Gear/Photo/Likl/(801)777-6501 Item 0001 NSN 1620-01-014-1859 P/N: 68A450683-1001, Axle nut 4140 steel 2.75 x 1.63 125ea. Applicable to: F-15 Acft. Destn: Hill Air Force Base, Ut 84056-5825. Delivery: 30 May 97 125 ea Qualification requirements: Sources must be qualified prior to being considered for award. The solicitation will contain instructions for obtaining further information on this requirement. The requirements of FAR 9.202(A) have been completed and copies of the qualification requirements and standards may be obtained as described in the solicitation. These qualification requirements apply to line item(s) all The approximate issue/response date will be 03 Jul 96. The anticipated award date will be 23 Jul 96. Written procedure will be used for this solicitation. To: Special Projects Mfg Co Inc, Fort Worth Tx 76108-2530. To: Caprice Engineering, Inglewood Ca 90301-2017. No telephone requests. Only written or faxed requests received directly from the requestor are acceptable. All responsible sources solicited may submit a bid, proposal, or quotation which shall be considered. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements is cited in each individual solicitation. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. Requests for copies of solicitations must reference the entire solicitation number, including purchasing office identification number. To expedite your request, limit the number of individual solicitation numbers requested per letter to not more than 10. Don't request information on this requirement until after the issue date. This proposed procurement is under a 100 percent small business set aside, the size standard for which is 1,000 employees. An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor, concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to the source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call Jack S. Jones if your concerns are not satisfied by the contracting officer (801)777-6991. This part required engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. Beginning May 1996, Ogden Air Logistics Center/PK (00-ALC/PK), Hill Air Force Base, Utah began a ''phase in'' process, distributing drawings associated with solicitation packages on CD ROM. Aircraft, Commodities and Missile Procurements will be affected. The ''phase in'' process will be by NSN. During this period data may be available on CD-ROM, Floppy Disk, or aperature cards. CD-ROM is the medium of preference. After SEP 1996 data available by CD-ROM will gradually increase. The minimum set-up requirements to view the drawings supplied by OO-ALC areas follows: 386 INTEL 33MHZ processor or higher; 8 MEGABYTES RAM; Any size hard drive; CD ROM reader (1X, 2X OR 4X); 14'' color monitor (17'' is recommended) DOS 5.0 or higher; windows 3.1 or higher, UNZIP software. To provide comments please contact Brad Bennett (801)777-0889 by 15 April 1996. For technical information please contact Kim Call at 801-777-6225. Limited or Rightsguard Data will be provided on aperature cards until further notice. See Note (s) 1. (0165)

Loren Data Corp. http://www.ld.com (SYN# 0233 19960614\16-0001.SOL)