|
COMMERCE BUSINESS DAILY ISSUE OF JUNE 17,1996 PSA#1617Directorate Of Contracting, Oo-Alc 6050 Gum Lane/Bldg 1215, Hill Air
Force Base, Ut 84056-5825 53 -- WHEEL DRIVE KEY SHIM SOL F42630-96-Q-69852 DUE 072396 POC For
copy, PKX-2/Pamala Chaffee/(FAX)801-777-7522, For additional
information contact Landing Gear/Photo/Likl/(801)777-6501 Item 0001 NSN
5315-01-295-5841LE P/N: 8631609-03, Shim & cover for wheel drive key
boss. Channel shape. Dim: approx 4'' x 3/4'' x 3/4''. Matl: steel.
Drives the brake rotors. 4076ea. Applicable to: F-16. Destn: Hill Air
Force Base, Ut 84056-5825. Delivery: 28 Feb 97 4076 ea Item 0002 data,
1 lot Qualification requirements: Sources must be qualified prior to
being considered for award. The solicitation will contain instructions
for obtaining further information on this requirement. The
requirements of FAR 9.202(A) have been completed and copies of the
qualification requirements and standards may be obtained as described
in the solicitation. These qualification requirements apply to line
item(s) all The approximate issue/response date will be 03 Jul 96. The
anticipated award date will be 23 Jul 96. Written procedure will be
used for this solicitation. To: Silco Engineering & Mfg Co, Chatsworth
Ca 91311-4812. To: Marc Avenue Corporation, Cuyahoga Falls Oh
44223-2627. To: Utah Tool & Die Inc, West Jordan Ut 84084 0969. To:
Warnkes Machining, Arlington Tx 76015 1535. First article test
required. No telephone requests. Only written or faxed requests
received directly from the requestor are acceptable. All responsible
sources solicited may submit a bid, proposal, or quotation which shall
be considered. Award will be made only if the offeror, the
product/service, or the manufacturer meets qualification requirements
at the time of award in accordance with FAR clause 52.209-1. The
solicitation identifies the office where additional information can be
obtained concerning qualification requirements is cited in each
individual solicitation. It is suggested that small business firms or
others interested in subcontracting opportunities in connection with
the described procurement make contact with the firm(s) listed.
Requests for copies of solicitations must reference the entire
solicitation number, including purchasing office identification number.
To expedite your request, limit the number of individual solicitation
numbers requested per letter to not more than 10. Don't request
information on this requirement until after the issue date. This
proposed procurement is under a 100 percent small business set aside,
the size standard for which is 1,000 employees. An Ombudsman has been
appointed to hear concerns from offerors or potential offerors during
the proposal development phase of this acquisition. The purpose of the
Ombudsman is not to diminish the authority of the program director or
contracting officer, but to communicate contractor, concerns, issues,
disagreements, and recommendations to the appropriate government
personnel. When requested, the Ombudsman will maintain strict
confidentiality as to the source of the concern. The Ombudsman does not
participate in the evaluation of proposals or in the source selection
process. Interested parties are invited to call Jack S. Jones if your
concerns are not satisfied by the contracting officer (801)777-6991.
This part required engineering source approval by the design control
activity in order to maintain the quality of the part. Existing unique
design capability, engineering skills, and manufacturing knowledge by
the qualified source(s) require acquisition of the part from the
approved source(s). The approved source(s) retain data rights,
manufacturing knowledge, or technical data that are not economically
available to the Government, and the data or knowledge is essential to
maintaining the quality of the part. An alternate source must qualify
in accordance with the design control activity's procedures, as
approved by the cognizant Government engineering activity. The
qualification procedures must be approved by the Government engineering
activity having jurisdiction over the part in the intended application.
Beginning May 1996, Ogden Air Logistics Center/PK (00-ALC/PK), Hill Air
Force Base, Utah began a ''phase in'' process, distributing drawings
associated with solicitation packages on CD ROM. Aircraft, Commodities
and Missile Procurements will be affected. The ''phase in'' process
will be by NSN. During this period data may be available on CD-ROM,
Floppy Disk, or aperature cards. CD-ROM is the medium of preference.
After SEP 1996 data available by CD-ROM will gradually increase. The
minimum set-up requirements to view the drawings supplied by OO-ALC
areas follows: 386 INTEL 33MHZ processor or higher; 8 MEGABYTES RAM;
Any size hard drive; CD ROM reader (1X, 2X OR 4X); 14'' color monitor
(17'' is recommended) DOS 5.0 or higher; windows 3.1 or higher, UNZIP
software. To provide comments please contact Brad Bennett (801)777-0889
by 15 April 1996. For technical information please contact Kim Call at
801-777-6225. Limited or Rightsguard Data will be provided on
aperature cards until further notice. See Note (s) 1. (0165) Loren Data Corp. http://www.ld.com (SYN# 0286 19960614\53-0001.SOL)
53 - Hardware and Abrasives Index Page
|
|