Regional Contracting Department (Code 202.18SA), Fleet and Industrial Supply Center, Box 300, Pearl Harbor, HI 96860-5300

53 -- ROLLING SERVICE DOOR SOL N00604-96-Q-A091 DUE 072396 POC Contact Point: S. AGBAYANI (Code 202.18SA), 808/474-2397, Ext. 241, Contract Specialist, R. Kay, Contracting Officer Rolling Service Door to include all guides, hoods, operating mechanisms and special features as pertaining to the type of door. Exterior rolling doors shall be designed to withstand at least a twenty (20) pounds per square foot windload. Windloads shall be provided as required for windload protection. All service doors and grilles shall be able to withstand a standard maximum of up to 50,000 operating cycles for the life of the door and 6 cycles per day for side-coiling doors. The door curtains shall be constructed in accordance with testing agency requirements and shall bear a factory installed class label. Exterior ''Weatherbar'' and insulated doors shall contain a vinyl astragal on the bottom bar. Door slats shall be No. 5. Guides to be constructed of steel angles forming a channel for the curtain to travel in. 1/2 inch fasteners. The pinion gear shall not be less that a 3 inch pitch diameter. Maximum manual effort of not more than 30 pounds. Chain operation shall operate with an endless chain and cast iron reduction gears. Locking device shall be standard provided. Finish Galvanized steel curtain and hoods shall have FinalCoteTM finish. All other exposed surfaces shall receive one coat of dark bronze rust inhibiting paint. FOB Destination, Pearl Harbor,Hawaii. All responsible sources may submit a proposal which shall be considered by the agency. Please fax your request for quotation package to (808) 471-5750/474-8885. Please include with your request your phone and fax number. As an alternative you can submit a written request to the contracting office identified above. (0169)

Loren Data Corp. http://www.ld.com (SYN# 0262 19960618\53-0001.SOL)