|
COMMERCE BUSINESS DAILY ISSUE OF JUNE 20,1996 PSA#1620AFFTC/PKAB Directorate of Contracting, 5 S Wolfe Ave, Edwards AFB CA
93524-1185 FAX 805-258-9638 71 -- MISSION CONTROL ROOM CONSOLES SOL F04611-96-R-0054 DUE 081296
POC Marjorie Evans, Contract Specialist, (805) 277-3900 Ext 2316 John
A. Adair, Contracting Officer, (805) 277-3900 Ext 2230. The Air Force
Flight Test Center Edwards AFB California, has a requirement for the
installation and procurement of mission control console stations for
new mission control rooms (MCR). Console stations shall consist of
three different type modules and two other kind of console systems.
Console stations must interface, and match with the existing consoles
currently used in the MCR. The three basic modules are: Tall, Medium
and Short Modules, each consisting of two consoles. Each module shall
be capable of accomodating Advance Data Acquisition Programs Systems
workstations, workstation monitors, strip chart recorders, dedicated
video monitors, video controllers/selectors, communications panels, and
timing display units. All module components shall be built into
consoles that include removable racks for workstations or strip chart
recorders, removable table surfaces, document storage space, and
lighting. Components shall be installed at an angle for optimal field
of vision. Tall modules shall be located around the MCR periphery.
Medium modules shall be rolled inside the tall modules located around
the MCR. Short modules shall be located in the center of the MCR. The
two other kinds of console systems are: One bay straight add-on rack,
and mid center console large unit systems. Tall modules shall conform
to any of the following several configurations: (1) Module A (Two strip
chart recorder modules) must be capable of housing two roll-in strip
chart recorder racks, strip chart pre-amps, communications panels,
video monitor, video controller/selector, and timing display unit. (2)
Module B (Workstation and strip chart recorder module) must be capable
of housing two roll-in racks (one for workstation on the left, and the
other for strip chart recorder, video monitor, communications panels,
video controller, and timing display unit on the right). (3) Module C
(Strip chart recorder and workstation module) shall be a mirror image
of Module B. The strip chart recorder rack is on the left, and
workstation rack is on the right. (4) Module D (two workstation module)
must be capable of housing two roll-in workstations, communications
panels, video monitors, video controller/selectors, and timing display
units. Medium modules shall consist of one of either two different
type racks: Strip chart recorder racks and workstation racks. These
racks (medium modules) shall be able to roll in/out and attached to the
tall modules. Short modules (low profile console modules) shall be
capable of housing and providing spaces for a workstation with 20 inch
monitor, communications panels, a video controller/selector, and a
dedicated video monitor. The one-bay straight add-on rack system shall
be a 19 inch rack to be capable of housing monitors, communications
panels, video control panels, and timing display unit. The mid center
console shall include two 19 inch rack cabinets, two 2-bay consoles,
and two 1-bay consoles. A requirement exists for approximately 190
consoles over a five year period (FY 96 thru 00). The above mission
control console stations shall not be ''system furniture''. These
console stations shall be the custom made to meet MCR specifications.
All necessary hardware shall be included. Delivery and installation
will be at Edwards Air Force Base CA. FOB point will be Destination. A
site visit will be held on or about 25 Jul 96. The names and phone
numbers for any prons planning on attending the site visit must be
provided to the contract negotiator prior to the date of the site
visit. Proposals from all responsible sources will be considered.
Responses must include sufficient technical and pricing data to allow
evaluation. Solicitations will be issued on or about 10 Jul 96 with a
30 day proposal period. fax 805-258-9638 SIC code 2522, size standard
500 employees. SEE Note 22. Telephone requests to be placed on the
mailing list will not be honored. (0170) Loren Data Corp. http://www.ld.com (SYN# 0440 19960619\71-0001.SOL)
71 - Furniture Index Page
|
|