Directorate Of Contracting, Oo-Alc 6050 Gum Lane/Bldg 1215, Hill Air Force Base, Ut 84056-5825

13 -- CONNECTOR EXPLOSIVE TRANSFER SOL F42630-96-Q-70254 DUE 091196 POC For copy, PKX-2/Pamala Chaffee/(FAX)801-777-7522, For additional information contact Genee Ringel/Likm/(801)775-2093 Item 0001 NSN 1377-01-243-0320ES P/N: 51324-1, Predom. mat'l alum. w expl. chg of. 456 grams lgth 4.049'' width. 75'' hgth. 1.050'' and is ballistic initiated. Alternate NSN 1377-00-465-9586ES P/N 808811-1 4ea. Applicable to: F-111. Destn: FMS Countries. Delivery: 29 Aug 97 4 ea Item 0002 NSN 1377-01-243-0321ES Connector,Explosive Transfer P/N: 51323-1, Acft ejection system,ballistic dev predom mat'l alum. Explos. Charge. 304 grms lgth 2.44'',width. 75,hgth1.05'' ballistically initiated Alternate NSN: 1377004659584ES, P/N: 808808-1 5ea. Applicable to: F-111. Destn: FMS Countries. Delivery: 29 Aug 97 5 ea Item 0003 NSN 1377-01-243-0322ES Connector Assy P/N: 51326-3, Acft ejection sys (life support) ballistic device. Predominant matl: steel, booster charge inc, length 2.16'', width 1.64'', height 0.95''. Alternate NSN: 1377-00-074-3200ES, P/N: 807216-1. 29ea. Applicable to: F-111. Destn: FMS Countries. Delivery: 29 Aug 97 29 ea Item 0004 NSN 1377-01-243-0323ES Connector P/N: 51532-1, Aircraft ejection system (life support) ballistic device. Predominant material: aluminum with explosive charge of. 1006 lbs, length 3.92'', width 1.05'', height 0.75'' and is ballistically initiated. Alternate NSN: 1377-00-989-8159ES, P/N: 807447-1. 20ea. Applicable to: F-111. Destn: FMS Countries. Delivery: 29 Aug 97 20 ea Item 0005 NSN 1377-01-241-7982ES Connector P/N: 51325-3, Acft ejection sys (life support) ballistic device. connector assyn explosive transfer. 4 port, 2 holes, 0.213 inches in diameter. Alternate NSN: 1377-00-989-8279ES, P/N: 807177-1 34ea. Applicable to: F-111. Destn: FMS Countries. Delivery: 29 Aug 97 34 ea Qualification requirements: Sources must be qualified prior to being considered for award. The solicitation will contain instructions for obtaining further information on this requirement. The requirements of FAR 9.202(A) have been completed and copies of the qualification requirements and standards may be obtained as described in the solicitation. These qualification requirements apply to line item(s) ALL The approximate issue/response date will be 22 Aug 96. The anticipated award date will be 11 Sep 96. Written procedure will be used for this solicitation. To: Teledyne Mccormick Selph, Hollister Ca 95024 0006. To: Oea Aerospace Inc, Fairfield Ca 94533-0659. No telephone requests. Only written or faxed requests received directly from the requestor are acceptable. All responsible sources solicited may submit a bid, proposal, or quotation which shall be considered. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements is cited in each individual solicitation. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. Request for copies of solicitations must reference the entire solicitation number, including purchasing office identification number. To expedite your request, limit the number of individual solicitation numbers requested per letter to not more than 10. Don't request information on this requirement until after the issue date. An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor, concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to the source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call Jack S. Jones if your concerns are not satisfied by the contracting officer (801)777-6991. This part required engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. (0215)

Loren Data Corp. http://www.ld.com (SYN# 0200 19960805\13-0001.SOL)