OFFICER IN CHARGE, NAVFAC CONTRACTS, BLDG. #5, HIGHWAY 547, NAVAL AIR ENGINEERING STATION, LAKEHURST,, NJ 08733-5011

C -- ARCHITECT-ENGINEER (A-E) SERVICES FOR VARIOUS REPAIR/ALTERATION/NEW CONSTRUCTION PROJECTS SOL N62472-96-R-3271 DUE 091296 POC Contact Point, information call, John Muller, (908)323-2695 Indefinite Quantity (IQ) contract to provide architectural-engineering (A-E) services for projects to repair and/or renovate the interiors and/or exteriors of various buildings or other facilities or to construct new facilities. The work will be located at the Naval Air Engineering Station (NAES), Lakehurst, NJ. An A/E firm with multi-discipline capabilities is required to provide technical studies and/or designs with all associated architectural or engineering services coincident with the preparation of reports or the production of construction contract plans, specifications and cost estimates for an assortment of projects. Optional work may include Design Completion or Post Construction Award Services (PCAS) such as; shop drawing review/approval, consultation during construction, preparation of record drawings, construction inspection, etc. A span of up to eighteen months may occur between the completion of the basic task order requirements and the award of optional work. As part of this contract, assessment of facilities for asbestos containing materials, lead or other contaminmants may be required, as well as, the design for the abatement or removal of the asbestos, lead and/or other contaminants in those facilities. Firms unwilling, unable or not possessing qualifications( in house or through a sub-contractor/consultant) to perform work involving the detection of hazardous material (e.g. asbestos, lead etc.) and the subsequent design for its abatement and/or removal will not be considered for this contract. General Contract Terms: Firm Fixed Price by project (task order); maximum cumulative fee per year - $495,000; minimum contract fee - $24,750.00; length of contract - one year with an optional second year exercised at the discretion of the Government (award of the second year will depend on the performance of the A/E firm during the initial year of the contract as well as the design workload); estimated start date March 1997. In order of importance, the principal evaluation factors for selection are: 1) Specialized experience and competence (including quality control program) of the firm in the type of work described above; 2) Professional qualifications of the staff to be assigned to this contract that will assure the satisfactory performance of the required services; 3) Past performance on contracts with Government agencies (with emphasis on the DOD) and private industry in terms of cost control, quality of work and compliance with performance schedules; 4) Capacity of the assigned team to accomplish the work within required time constraints: 5) Volume of work previously awarded to the firm by the DOD; 6) Geographic location of the firm with respect to the planned area of work and knowledge of the locale where the projects will occur. Secondary evaluation factors for selection are: a) the use of Small or Disadvantaged or Women Owned Business firms as primary consultants or as subcontractors. b) Observance of instructions. For purposes of conforming to the requirements of Criterion #2 with respect to Fire Protection Engineering, the A-E or his subcontractor must employ multiple personnel each of whom meet one or more of the following: 1) engineers have a Bachelor of Science or Master of Science Degree in Fire Protection Engineering conferred by a college or university with an accredited engineering program in that specialty plus, a minimum of four years of work experience in fire protection engineering; 2) engineers who have been granted a state license as a Professional Engineer in the field of fire protection engineering; 3) engineers who have been granted a state license as a Professional Engineer in a field related to fire protection engineering and have attained member grade status in the National Society of Fire Protection Engineers. 4) engineers who have a minimum of ten years of work experience in fire protection engineering and have attained member grade status in the National Society of Fire Protection Engineers. At any time during the terms of this contract, the A-E may be required to use the metric system of measure for the preparation of design calculations and construction contract documents. Responses must include a descriptiion of each firm's ability to comply with the requirement to use the metric system. The construction contract documents submitted for this contract will be prepared by computer to the maximum extent practical. NAES employs an MSDOS compatible computer system which uses: SPECINTACT, WORDPERFECT 5.1 or Microsoft Word 6.0 software for the preparation of the specifications; and AutoCAD, DWG format, Release 10 or later, for the drawings. The A/E will be required to submit final versions of both the specifications and drawings that are prepared for this contract in hard copy as well as on either compact discs (preferable) or 3-1/2 inch high density diskettes which are ready for use with the computer system/software stated above. Qualified firms desiring consideration for this contract must submit completed Standard Forms 254 and 255 (including information for any contemplated subcontractors or consultants) to the office listed above by 4:30 PM (EST) 12 September 1996. Only one copy of each form is required: additonal copies and inifomation which is not a component of either the SF 254 or SF 255 will be discarded and no information will be returned. Should the due date fall on a weekend or on an official Government holiday, responses are due on the first Government workday thereafter. Responses received after the date indicated above, will be handled in accordance with FAR 52.215-10. Observe the following when completing the SF 255: 1) Firms with offices in multiple locations must clearly indicate in Block 3 the site at which the work will be performed and, in Block 7c for each key person, the office (city and state) at which that individual is employed: 2) Use Section 8 to describe individual projects (NOT IQ Contracts) that exemplify the work done by the firm - maximum length of description per project will be one side of an 8-1/2 X 11 inch sheet - photographic or graphic material about a project is permisible on the side of the previous 8 1/2 X 11 sheet that faces the respective project description; 3) For each project listed in Section 8, indicate the key persons from Section 7 who worked on that project and their role in that specific endeavor; 4) As appropriate, use either Section 9 or Section 10 (NOT Section 8) to reference IQ contract experience; 5) In Section 10, describe the reasons why the firm is especially qualified for the work with regard to each of the evaluation factors listed above. Include the following in the description of the appropriate selection criterion provided in Section 10: a) the process used for cost control and the key person from Section 7 responsible; b) the process used for quality control and the key person responsible; c) the process used for compliance with the performance schedule and the key person responsible. Use Section 10 of the SF 255 and continued on PLAIN BOND PAPER to provide any additional information desired; maximum length of Section 10 - fifteen (15) sides of 8 1/2 x 11 sheets using a 10 pitch or larger font. The SF 254 and SF 255 submited in response to this announcement must be the current versions of those forms. ALL PERTINENT INFORMATION MUST BE CONTAINED WITHIN, AND RELEVANT TO, THE VARIOUS SECTIONS OF THE SF 254 OR SF 255; NO OTHER INFORMATION OR ATTACHMENT THAT ACOMPANY THE SF 254 AND SF 255 (e.g. Company Brochures) WILL BE CONSIDERED IN THE EVALUATION PROCESS. Computer generated replicas of the SF 254 and SF 255 are acceptable. Hand carried responses and facsimile responses will not be accepted. This is not a requrest for proposal. This solicitation is being issued on an unrestricted basis. (0221)

Loren Data Corp. http://www.ld.com (SYN# 0023 19960809\C-0001.SOL)