|
COMMERCE BUSINESS DAILY ISSUE OF SEPTEMBER 6,1996 PSA#1674MK Ferguson Company, 7295 Highway 94 South, St. Charles, Missouri
63304 Y -- STRUCTURAL MODULE FABRICATION SOL RFP-3589-STRUCMOD. POC. Gary J.
Parkanzky, (314) 441-8086 Extension 3724 Facsimile (314) 447-0803.
Pre-Qualification of potential Suppliers RFP No. 3589-STRUCMOD.
MK-Ferguson Company (MK-F) is currently performing work under a
Department of Energy Prime Contract at the Weldon Spring Site Remedial
Action Project (WSSRAP) located in St. Charles, Missouri. MK-Ferguson
is requesting information from prospective Suppliers who are
interested in being pre-qualified for proposing on a competitive firm
fixed price purchase order for the fabrication of structural modules
briefly described below. Interested qualified parties should have the
necessary prior experience and ability to fabricate structural modules
in accordance with hard specifications and stringent quality control
procedures. The structural modules will be installed at the WSSRAP
site, by others. Only pre-qualified prospective Suppliers will be
allowed to submit proposals. In order to be pre-qualified prospective
Suppliers must satisfy the following minimum requirements and submit
information substantiating their qualifications: (1) Submit cover page
or title page, and table of contents (listing sections and
subsections) of quality assurance plan or manual which is adhered to
for all projects. (2) Provide a personnel organization chart showing
the positions and number or persons in each position at the place of
fabrication. (3) Submit project names, client company names, client
contact persons, phone numbers, addresses, and brief descriptions of
scopes of work of at least two recent projects similar in scope to this
project that were performed within the last five years. The two
projects shall have included simultaneous in-house fabrication of
multiple complex structural and piping modules having nominal
dimensions of 10 ft. X 5 ft. X 60 ft. (4) Submit a list of in-shop
skilled crafts including, at a minimum, pipe fitter-welder, structural
fitter-welder, sandblaster, painter, and quality control inspector.
(5) Submit documentation of in-house ability to simultaneously
fabricate a minimum of three of the 22 structural modules described in
this announcement. Documentation shall, at a minimum, include a list
of fabrication equipment (quantity and capacity) for cutting, forming,
welding, handling, machining, sandblasting, painting, and testing. (6)
Provide fabrication area (square footage), note any areas which have
overhead crane facilities, and note all respective crane capacity(s).
(7) Substantiate the financial capability and capacity to complete a
project with an estimated value of $500,000 to $1,000,000. The Supplier
will furnish all necessary equipment, materials (including but not
limited to structural steel, pipe, and fittings), and labor as required
for the fabrication, assembly, testing and delivery of the structural
modules. Following is a brief description of the several types of
structural modules anticipated to be required under this procurement
action: Six (6) each Walkway and Piperack with Support Bents; Four (4)
each Walkway and Piperack with Support Bents with Stair; Three (3)
each Piperack at Ground Level; Two (2) each Support Platform and
Stairway; One (1) each Walkway and Stair Tower; One (1) each Walkway;
One (1) each Pipe/Electrical Rack with Support Bents; One (1) each
Stair Tower; One (1) each Stair Tower and Piperack Stairway; One (1)
each Operators Platform. Estimated magnitude of this procurement is
between $500,000.00 and $1,000,000.00 and the Request for Proposals
will be issued on or about November 1996. Fabrication is scheduled to
begin on or about February 1997 and be completed no later than June
1997. Pre-qualification packages are due no later than October 1, 1996.
This project is open to both large and small businesses. Suppliers who
are interested in this procurement and that meet or exceed the minimum
qualifications noted above should submit their pre-qualification
documentation to: MK-Ferguson Company, 7295 Highway 94 South, St.
Charles, Missouri 63304, Attn: Gary J. Parkanzky. (247) Loren Data Corp. http://www.ld.com (SYN# 0120 19960905\Y-0005.SOL)
Y - Construction of Structures and Facilities Index Page
|
|