Defense Supply Center Columbus PO Box 16595 DSCC-PBAB Columbus, OH 43216-6595

59 -- RELAY, ELECTROMAGNETIC SOL SP0930-96-T-9006 DUE 102996 POC Contact: for copy of solicitation FAX 614-692-2262 or mail request to Defense Supply Center Columbus, PO Box 1659 5, DSCC-PBAB, Columbus, OH 43216-6595. contact contrac ting officer for info. please use entire solicitations number when ordering documents. failure to do so may result in non receipt or delay in receipt. F PR-NO: YPE96012000163 NSN 5945-00-679-1846, CAGE 04361 Part No MEP17 CAGE 04361 Part No MEP17-28VDC CAGE 18876 Part No 9166041 CAGE 49956 Part No 2711385P1 CAGE 71313 Part No 9166041 CAGE 82415 Part No 6297-11 nonpile-up main contact arrangement: 1 pole, double throw, one position momentary. Main contact maximum voltage rating in volts: 115.0 AC main contact load current rating at maximum rated voltage: 10.0 amperes AC resistive load. Operating voltage rating and type at specified temp: 28.0 volts DC 25 deg Celsius single winding 46 -EA Del to Mechanicsburg PA 17055-0789 Del by 15 Feb 96. Full and open competition: complete, unrestricted data package available. Special provisions for first article requirements test reports and samples/evaluations and approval. Where to send samples and test report dscccmbg first article samples for government evaluation will, upon completion of evaluation. be returned to the contractot as production standards but shall not be subm itted for acceptance as part of the order quantity. First article samplesare to be retained by the contrac tor and disposed of as follows: 1) sample will be retained as production standards but shall not be submitted for acceptance as part of the order qty. Conditions for waiver of first article testing: the government reserves the right to waive the requireme Nt for first article testing for those offerors of a product which A) has been previously accepted by the Gov't and has not been found to be UNSATISFACTORY.B) has previously met the preproduction testing requirement been accepted by the government and has not been found to be unsatisfactory. C) has previously been approved by the original equipment manufacturer (OEM), providing the offeror can demonstrate approval and will certify HE has no evidence of subsequent difficulty or disapproval by the CEM or any government agency. Solicited various increments from: 20 to 79 i-5 first article approval-contractor testing (X) (A) the contractor shall test 13 unit (S) of lot/ ITEM____AS specified in this contract. (X) (B) estimated test TIME_60 days. (X) (C)_60 days will be required for preproduction test review(does not include mailing time). Engineering support/quality assurance supplemental information 1) life test: Note 15 of Micom Dwg # 9166041 shall include loading of N.O. and N.C. contacts with 10 amp noninductive load at 115.0 volts A.C. with contacts making, but not breaking the specified load. 2) vibration test: Note 17 of Micom Dwg # 9166041 shall be changed to read: ''vibrate material at 05 inch double amplitude at 4 cycles per second for a period of 10.0 minutes delivery schedule: 120 days standard size: 500 set-aside type: unrestricted (sole source/single source) (no preference) all responsible sources may submit offer which DESC shall consider.(0291)

Loren Data Corp. http://www.ld.com (SYN# 0194 19961018\59-0002.SOL)