TOBYHANNA ARMY DEPOT, ATTN SIOTY-KO, 11 HAP ARNOLD BLVD, TOBYHANNA PA 18466-5100

34 -- COMPUTER NUMERICAL CONTROLLED TURRET PUNCH PRESS WITH PLASMA OPTION SOL DAAC71-97-R-0001 DUE 121396 POC Contract Negotiator MARION Y. PICKENHEIM (717) 895-6627 Contracting Officer JOYCE K. BEDNAR (717) 895-6369 (Site Code DAAC71) Fully automatic, solid-state, integrated circuit type, Computer Numerical Controlled (CNC) Turret Punch Press with Plasma Option, software, hardware, and accessories is required to replace a Government-owned Wiedemann 4560P Turret Punch Press with Plasma Option. Due to quantity and condition of existing Wiedemann Style 114 Tooling owned by the government, tooling/punches are not required unless the punch press being offered cannot utilize the existing tooling whereby the vendor must then supply a basic set of tooling corresponding to the existing tool/punch inventory. CNC Plasma option required to enhance cutting versatility. Some, but not all, Punch Press mechanical requirements are: Heavily reinforced piece frame with rigid triple box construction or similar design; minimum punch capacity of 45 ton; hydraulic ram; positioning table shall be box frame construction base or similar design and use precision linear motion guides and bearings; minimum of 52 tool stations; slug conveyor for removal of knockout material; hour meter; lubrication plate; machine size/foot print not greater than 20 feet by 24 feet or more than 12 feet high. Some, but not all, punch press performance requirements are: handle material up to .375 inches thick; minimum throat depth of 60 inches; minimum table travel of 72 inches by 60 inches; handle sheets up to 440 lbs.; handle sheets, 60 inches by 72 inches, without repositioning and up to 60 inches by 144 inches with one reposition; table capable of 2000 inches of linear movement/minute; ram capable of a minimum stroke of 1.25 inches; 180 hits/minute in low speed, 200 hits/minute in high speed on 1 inch centers, and minimum nibble rate of 300 hits/minute on .315 inch centers; punch position accuracy of plus or minus .005 inches; turret capable of bi-directional rotation at a rate of 30 RPM minimum. Punch press must operate on 460 VAC, 3 phase, 60 cycle power. Control requirements: Punch press shall employ CNC type controls housed in a totally enclosed cabinet; a compatible post processor shall be supplied to run on the government's existing Computervision System CVNC software, commands, CL file output data, graphical tool path displays and interface. All supplied software, hardware, and accessories must be compatible with Tobyhanna Army Depot's existing DNC System (DNC5000) manufactured by CADCAM Integration; CCI DNC 5000 Software, with Status collection, by CADCAM Integration is required. Solicitation also includes documentation, installation, acceptance testing, training, and 1 year warranty. Contractor shall be responsible for turnkey performance of contract. Quantity will be for 2 systems or 1 system with an option to purchase an additional system. DAAC71-97-R-0001 applies; approximate issue/close dates are 13 NOV 96/13 DEC 96; FOB Destination Tobyhanna, PA. All responsible sources may submit a proposal which shall be considered. See Note 12. (0299)

Loren Data Corp. http://www.ld.com (SYN# 0175 19961028\34-0001.SOL)