Navy Public Works Center Code 846 Bldg 3213 2730 McKean St Ste 1 San Diego CA 92136-5294

95 -- STEEL PLATE/ANGLE/BAR SOL N63387-97-Q-L515 DUE 121396 POC Kohala Hembre, Purchasing Agent, (619)556-7631, FAX: (619)556-7775 Jessie Bermudez, Contracting Officer, (619)556-7244. 32 PM Steel plate, hot rolled, ASTM A36, sheared, 1/4 IN X 5 FT X 5 FT. Permissible deviation length and width - Plus 1/4 IN - Minus zero IN. Edge shall be clean cut with 90 deg corners. Plate shall be sandblasted in accordance with steel structures painting council standard SP-10 (Near White) and coated with 3 MIL (dry) green polyamide epoxy primer. Apply primer in accordance with Mil-P- 24441B/29 TYPE IV. Domestic material only with certificates of origin required. 64 PM Steel plate, hot rolled, ASTM A36, sheared, 1/4 IN X 5 FT X 7 FT. Permissible deviation length and width - Plus 1/4 IN - Minus zero IN. Edge shall be clean cut with 90 deg corners. Plate shall be sandblasted in accordance with steel structures painting council standard SP-10 (Near White) and coated with 3 MIL (dry) green polyamide epoxy primer. Apply primer in accordance with Mil-P-24441B/29 TYPE IV. Domestic material only with certificates of origin required. 3 LG Steel bar flat, ASTM A36, 6 IN X 3.5 IN X 5/16 IN. 20 feet lengths. Steel Bar shall be sandblasted in accordance with steel structures painting council standard SP-10 (Near White) and coated with 3 MIL (dry) green polyamide epoxy primer. Apply primer in accordance with Mil-P- 24441B/29 TYPE IV. Domestic material only with certificates of origin required. 80 LG Steel angle, ASTM A36, 6 IN X 3.5 IN X 5/16 IN. 20 feet lengths. Steel Angle shall be sandblasted in accordance with steel structures painting council standard SP-10 (Near White) and coated with 3 MIL (dry) green polyamide epoxy primer. Apply primer in accordance with Mil-P-24441B/29 TYPE IV. Domestic material only with certificates of origin required. 40 LG Steel angle, carbon hot rolled, 1/2 IN X 6 IN X 6 IN. 20 feet lengths. Steel Angle shall be sandblasted in accordance with steel structures painting council standard SP-10 (Near White) and coated with 3 MIL (dry) green polyamide epoxy primer. Apply primer in accordance with Mil-P-24441B/29 TYPE IV. Domestic material only with certificates of origin required. (0324)

Loren Data Corp. http://www.ld.com (SYN# 0274 19961120\95-0001.SOL)