Afftc/pkad Directorate Of Contracting, 5 S Wolfe Ave, Edwards Afb Ca 93524-1185

74 -- ENGINEER COPIER SOL F04700-97-T-0166 DUE 010897 POC Donna Chesher, Contract Specialist, (805)277-3900, ext. 2216, John Lemacks, Contracting Officer, (805)277-3900, ext. 2253 WEB: on-line acquisition solicitation information system, http"//cpf.edwards.af.mil/contract/rfp.html. E-MAIL: click e-mail link to contact the POC, chesherd%pk@mhs.elan.af.mil. The Air Force Flight Test Center has a requirement for an engineer copier. See synopsis published on 25 Nov 96 for details. The due date for offers is changed to 8 Jan 97. The minimum salient characteristics are changed as follows: The copier will have a two-roll paper feeder, automatic. The capability to do variant enlargements and reductions, the range should include "A" size through "E" size prints or vice versa. When the copier is connected to the Local Area Network, it becomes a network plotter. The copier must be capable of a minimum printable area 36 inches in width by up to 50 feet in length. The copier must fit comfortably in a 100 sq. ft. room. The copier must accept manual and 2-roll automatic feeds, of plain paper, transparent paper, film and vellum, in a minimum width of 8.5 inches and minimum length of 11 inches. The copier must handle 2 rolls of 500 ft film at once. The scanner CCD must give a true optical scan of 400 DPI and retain a minimum of 19 copies from one scan. The scanner must accept originals of 8.5" x 11" with a maximum scan width of 36". The maximum original length to be used with the scanner is 48 inches. The scanner will have automatic background compensation and lighter/darker settings for exposure control. The controller should be capable of plotting a 1 megabyte D' size HPGL/2 file in under one minute. Controller must be upgradeable to future developments. The vector data format should be compatible with HP GL and HP GL/.2. The plotter should plot at 400 dpi. The plotter should scale raster images to original size and automatically rotate raster and vector images and automatically select and plot to the best fit roll. Plotter must plot Microstation/AutoCad Version XX in HPGL/2. The purchase and installation will include delivery, installation, operating instructions, documentation, maintenance. Acceptance will be when the machine is fully operational. The contractor will coordinate with the government on when installation will occur. The contractor will provide all materials (software, documentation and paper) and labor for the installation. The contractor will ensure network plotting functions properly on the government's existing network topology. The government will provide proper infrastructure connections (LAN, workstations, space and electrical outlets and location). The contractor will provide on-site operating instructions that enable full and complete operation of the copier, and off-site consultation by telephone. The contractor will deliver the most current materials/documentation for copier operations. Offers are due at the Air Force Flight Test Center, Directorate of Contracting, 5 S Wolfe Ave, Edwards AFB CA 93524, on 8 Jan 97. Fax to (805)258-9689. Telephone requests to be placed on the mailing list will not be honored. (0347)

Loren Data Corp. http://www.ld.com (SYN# 0215 19961217\74-0001.SOL)