Department of the Navy, NAWCAD, Contracts Competency Division, MS32, 22541 Millstone Road, Patuxent River, MD 20670-5304

70 -- PORTABLE SIGNAL ANALYSIS SYSTEM FOR TEMPEST TESTING OF AIRCRAFT SOL N00421-97-R-1205 DUE 031997 POC Theresa Newbold, Contract Specialist, (301) 342-1825 (ext. 113) L.P. Sanders, Contracting Officer, (301) 342-1825 (ext. 137). SYSTEMWARE, Inc. Portable Signal Analysis System for Tempest Testing of Aircraft. CLIN 0001 Portable Signal Analysis System shall consist of the following components: 1 ea. P/N SWI-100P Portable System Controller; 1 ea. SWI-7300-64SB 200/Msa/sec Digital Oscilloscope with 256 MB RAM and Scopectl control software; 1 ea. SWI-BLIP Big Little Extraction Process System; 1ea. P/N SWI-DOM100E(S) Enhanced DOMINO Signal Analysis Software, 1 ea. P/N SWI-RAS100E Enhanced Rastering Software. Delivery of the system shall be 45 days after date of contract. Delivery will be made to Receiving Officer, Naval Air Station, Patuxent River, MD 20670. The system will be procured on a sole source basis from SYSTEMWARE, Inc., 325 East Hillcrest Drive, Suite 100, Thousand Oaks, CA 91360-5828. The authority permitting this sole source procurement is FAR 6.302-1 "Only one responsible source and no other supplies or services will satisfy agency requirements." SYSTEMWARE is the only company who has a hardware system configuration and software that can perform specific TEMPEST NONSTOP and Digital Testing required by KAG-30A "Compromising Emanations Standard for Crytographic Equipment", the NACSEM 5112 NONSTOP Evaluation Techniques, and the NTISSAM TEMPEST/1-92 "Compromising Emanation, Laboratory Test Standards, Electromagnetic". The SYSTEMWARE system is the only system that can meet the following minimum performance requirements. 1) The system is portable. 2) The system can perform complete analysis without a signal monitor and works with digital, analog and noise signals. 3) The SWI-RAS100E software provides a turnkey rastering system to run in the Microsoft Window's environment and will integrate with the SWI-7300 Digital Oscilloscope to permit the system to transfer rastered results to printers which are currently supported by Microsoft Windows. 4) The system software (i.e. SWI-DOM100E(S) and SWI-BLIP(S)) permits TEMPEST personnel to collect data and store data for later analysis. SYSTEMWARE exclusively possesses the data rights to the required software. This system software will function only when utilized in conjuction with the required SYSTEMWARE hardware configuration outlined above under CLIN 0001. Any questions regarding this synopsis may be faxed to the attention of Theresa Newbold (301) 342-1864. Notes (1) and (22) apply. (0036)

Loren Data Corp. http://www.ld.com (SYN# 0343 19970207\70-0005.SOL)