Crane Army Ammunition Activity, 300 Highway 361, SIOCN-CT, Crane, IN 47522-5099

13 -- OUTER TUBE, COVER, & BASE SOL DAAA32-97-B-0010 DUE 040197 POC Kim Christenberry, (812) 854-3326, Ronald E. Wise, Contracting Officer. 1. Tube, Outer (Quantity = 6,600 each) made in accordance with drawing #1212757, revision L. Material: aluminum alloy, QQ-A-200/8, shape, composition 6061, temper T6. Insert plug that is 2.887 plus/minus .001 dia. x 2.00 x plus/minus .50 long, in large open end of tube. With plug in place the tube shall drop freely thru a 2.98 max diameter tube by 16.00 plus/minus 1.00 long. If alternate construction of detail A is used, tube shall drop freely to the flared portion. There shall be no longitudinal grooves for dimension shown. 2. Cover (Quantity = 6,600 each) made in accordance with drawing #1212922, revision J. Material: aluminum alloy die casting, QQ-A-591, alloy no. 413.0. Part shall be free from cracks, voids and blow holes. O-ring groove shall be free from scratches tranverse the machine lay. After machining, impregnate in accordance with MIL-STD-276. After impregnation, cover shall withstand a hydrostatic or aerostatic pressure differential of 5 psi min. for 30 seconds min. without leaking. 3. Base(Quantity = 6,600 each) made in accordance with drawing #1305695, revision P. Material: aluminum alloy die casting, QQ-A-591, alloy NO. 413.0. Allowable draft 1 deg + draft means no portion of surface shall fall below indicated dimensions. draft -- means no portion of surface shall exceed indicated dimensions. No flash permitted on this surface. After machining impregnate in accordance with MIL-STD-276. After impregnation, base shall withstand, without leaking a hydrostatic or aerostatic pressure differential of 5 psi minimum for 30 seconds minimum. There shall be no flash permitted throughout area designated by 1.25 plus/minus .01 dimension. No burrs or stepped edges permitted on this surface. A Firm-Fixed-Price type contract will be issued for this requirement. Mil-I-45208A, Inspection System Requirements apply. All deliveries are to be made FOB Destination Crane Army Ammunition Activity, Crane, IN 47522-5099. Inspection is at source, acceptance at destination, Government First Article Testing. This is a 100% small business set-aside. All responsible small business sources may submit a bid which, if timely received, shall be considered by the agency. All request for solicitation must be in writing and may be faxed to (812) 854-3433, Attn: Kim Christenberry. The solicitation will be issued approximately 15 days after publication of this notice. (0050)

Loren Data Corp. http://www.ld.com (SYN# 0128 19970221\13-0002.SOL)