Loren Data Corp.

'

 
 

COMMERCE BUSINESS DAILY ISSUE OF MARCH 13,1997 PSA#1801

Naval Surface Warfare Center, Crane Division, Code 1162, Bldg. 2521, 300 Highway 361, Crane, IN 47522-5001

93 -- TUBE, FIBERGLASS EPOXY SOL N00164-97-Q-0141 DUE 041197 POC Contact Point, Mr Ron Smith, (812)854-1679 (A. Banks, Contracting Officer) The Navy requires 12,000 each Fiberglass Epoxy Tubes manufactured in accordance with NAVAIR drawing 3268AS107. Predominant material of manufacture is filament wound glass fiber/epoxy composite, 0.00050/0.00055 diameter "E" glass fiber (roving with 675 yds/lb yield). Epoxy resin in accordance with MIL-R-9300, type I, color black. Treated with compatible fire retardant additive to meet underwriters laboratory test UL 94V-0. Specification requirements apply after additive. The glass fibers shall be saturated with the epoxy resin and applied helically to a rotating mandrel at a 65 degree +/- 2 degree angle to the tube axis. The ID of the tube shall be as determined by the mandrel with no further machining required. The OD may be achieved with secondary machining operation. The apparent ring tensile strength of the tube shall be 2000 pounds minimum when tested in accordance with ASTM D2290, Procurement A, with the following exceptions: 1. Test specimen shall be a ring cut from a finished tube to a length of0.500 +/- .005 inches; 2. The test fixture and specimen will be as configured in figure 5 of the specifications with a split disk diameter of 1.425 +/-.005 and a thickness of 0.500 +/-.010. Finished components shall be free from frayed fibers. Delivery is required FOB Crane, IN to begin within 45 days after order. This acquisition will be processed utilizing simplified acquisition procedures, and it is anticipated that a written Request for Quotations will be issued on or about 26 March 97 with a closing date on or about 14 April 97. This requirement is a 100% small business set aside, and only quotations from small business concern manufacturers or small business distributors offering products of small business manufacturers will be considered. Requests may be faxed in to the above POC on (812)854-3762. See Note #1. 1997. Requests may be faxed to the above POC at (812)854-3762. See Note #1. (0070)

Loren Data Corp. http://www.ld.com (SYN# 0359 19970313\93-0001.SOL)


93 - Nonmetallic Fabricated Materials Index Page