Regional Contracting Department, Fleet & Industrial Supply Center, Box 300, Pearl Harbor, HI 96860-5300

38 -- DUST COLLECTORS SOL N00604-97-R-0012 DUE 032897 POC Sandy Nagayama, (808) 474-2397, Ext 223, Contract Specialist, CDR D.J. Graff, Contracting Officer Correction: This action originally publicized in the CBD dated 2/14/97 was corrected on amendments dated 2/19/97, 3/5/97, 3/11/97 and 3/14/97. This is the fifth amendment. Include with your proposal acknowledgement of all amendments by date. The closing date is extended to 3/28/97. Any questions received after 3/21/97, 4 p.m. HST, will not be considered. Incorporate the following into Item 6) of the specification: "Ninety-five percent of the surface shall be sandblasted to the equivalent to a near white metal blast as specified by the steel structures painting council (SSPC-SP-10). Paint each unit using a two-part epoxy paint which shall include primer and top coat.". Revise the statement on page 2 of 4 of the specification from ". . . hopper discharge shall include connecting flex hose and 55 gal drum cover." to ". . . hopper discharge shall include sliding steel blast gate valve, connecting flex hose and 55 gal drum cover.". Incorporate the following into the specification: "If the dust collectors are partially assembled for shipment, they shall be designed and shipped in such good condition that the reassembly by Government personnel shall not require more than 8 manhours to assemble each machine. At his option and expense, contractor may have representative present during assembly.". The following is for clarification purposes: No aluminum or magnesium parts shall come in contact with the dust laden air stream. This includes the blower and its component parts in the air stream. All other information publicized in the original synopsis is correct. (0076)

Loren Data Corp. http://www.ld.com (SYN# 0223 19970319\38-0001.SOL)