GSA, FSS, TACC, TAD II (6FESP-E7), 1500 E. Bannister Road, Kansas City, MO 64131

51 -- SCREWDRIVER, CORDLESS SOL 6FES-F1-N-W-A5488-1 DUE 041197 POC Tim Gosnell, 816-926-7587, fax 816-926-7587 NSN 5130-01-306-8384: The 2.4 volt cordless electric screwdriver shall be capable of converting/adjusting from a straight body grip form to a pistol grip form. Overall length with handle extended to body grip position shall be 9 1/2 inches, maximum. Body diameter shall be 1 1/4 inches, maximum. The cordless electric screwdriver shall be reversible and shall have two speed ranges (high & low). No load speed in the high range shall be 400 rpm; +/- 40 rpm. No load speed in the low range shall be 200 rpm; +/- 20 rpm. The cordless electric screwdriver shall have a multi-torque clutch with six pre-selected torque settings ranging from 3 to 25 inch-lbs. Each unit shall include: (1). One screwdriver. The screwdriver shall have a 1/4 inch hexagonal collet with a lock for manual mode, a clutch position selector, a forward/reverse switch, a speed selector switch, and an on/off switch lock. (2) One battery charger. The charger shall operate on 120V AC and shall be capable of charging a completely discharged battery pack to full capacity in a maximum of one hour. The charger shall have an internal disconnect switch to prevent over charging and a charging light. The charging light shall light up during charging and blink or go out when charging is completed. The charger shall have a storage compartment to store screwdriver bits. (3) One battery pack. The battery shall have two 1.2V Ni-Cd cells for a total battery voltage of 2.4V DC. The battery shall be removable, rechargable, and compatible for use with the screwdriver and battery charger. The cordless electric screwdriver shall be UL listed conforming to UL 45. UL listed items shall bear a UL label with the UL listing mark and all other markings in accordance with UL 45. Each unit shall be furnished with three 1/4 inch hex shank screwdriver bits: one size #1 phillips, one size # 2 phillips, and one size 3/16 inch slotted tip; and operating manual(s). The manual shall delineate operating, safety, and maintenence instructios for the screwdriver, the battery charger,and the battery pack. Bar code marking required. Qty 1,260. (0086)

Loren Data Corp. http://www.ld.com (SYN# 0249 19970331\51-0002.SOL)