|
COMMERCE BUSINESS DAILY ISSUE OF APRIL 4,1997 PSA#1817ASC/YDK, Bldg 16, 2275 D Street, M/S 16, Suite 16, Wright-Patterson
AFB, Oh 45433-7233 16 -- B-1B JOINT STANDOFF WEAPON AND JOINT AIR-TO-SURFACE STANDOFF
WEAPON EMD SOL n/a POC Linda Young (937)255-5024 This CBD announcement
constitutes a Sources Sought Synopsis. The B-1B System Program Office
(SPO), Aeronautical System Center (ASC), is planning for the
integration of the Joint Standoff Weapon (JSOW) and Joint
Air-to-Surface Standoff Missile (JASSM) for the B-1B Bomber. Both
weapons are required to be compatible with MIL-STD-1760 and will be
certified for conventional weapon use only. The Air Force is
anticipating contract award in the January 1999 time frame to a single
contractor who will be best qualified to integrate the weapons. The
contractor will be responsible for the engineering, manufacturing and
development (EMD) for aircraft and launcher configurations for JSOW and
JASSM weapons delivery. As a minimum this will include the physical
interfaces for the internal carriage of the JSOW and JASSM on the 180
inch Multi-Purpose Rotary Launcher; the MIL-STD-1760 Class II
electrical interconnection system between the aircraft and the JSOW and
JASSM; interface with the AF SEEK EAGLE weapon certification process;
any software required to status, launch and jettison the weapons; and
ensuring that Block E B-1B capabilities are not degraded as a result of
this effort. Development testing for JASSM and JSOW on the B-1B is
schedule to begin FY01 first quarter. Contractors interested in this
effort must submit the following information for evaluation to the
government. Responses should be concise, program specific and include
all six areas: 1) Description of experience in the integration and
certification of conventional weapons on to the B-1B platform and/or
other Air Force or other comparable program. 2) Description of software
development experience as well as facilities/assets currently available
to accomplish the design, development and fabrication of any required
hardware. 3) List the qualifications of lead management, engineering,
manufacturing and quality assurance personnel projected to work on this
program as related to B-1B and/or other Air Force (or other comparable
program) aircraft component or subsystem production experience. 4)
Indication of large or small business in relation to SIC code 3728,
size standard 1000 employees. 5) Indication of level and types of B-1B
technical data, analytical tools and data bases required to accomplish
this effort. The baseline software configuration for this integration
effort will be Block E Software in development from April 1998 through
October 1999. The Block E software will be available no earlier than
November 1999, however it will remain under Boeing North American
control until FCA/PCA currently scheduled for January 2001. The JASSM
and JSOW effort will be developed concurrently with Block E computer
upgrade. B-1B data on the rotary launcher will be made available upon
request. 6) Please indicate if your interest is a prime or
subcontractor. The government reserves the right to break out
components and set aside specific tasks for small business. An
Ombudsman has been established for this acquisition. The only purpose
of the Ombudsman is to receive and communicate serious concerns from
potential offerors when an offeror prefers not to use established
channels to communicate his concern during the proposal development
phase of this acquisition. Potential offerors should use established
channels to request information, pose questions, and voice concerns
before resorting to use of the Ombudsman. Potential offerors are
invited to contact ASC Ombudsman, Mr. Michael Coalson, ASC/SY, WPAFB,
OH at (937) 255-5535 (ext 232) with serious concerns only Routine
concern communication should be directed to the point of contact listed
below. Potential offerors are requested to submit two (2) copies of an
unclassified response (limited to 10 pages) within 30 days after
publication of this notice to ASC/YDK, WPAFB, OH 45433-7233, Attn: Ms
Linda Young, Contract Negotiator, (937) 255-5024, E-mail address:
YoungLL@B1B.WPAFB.AF.MIL. Requests for further information regarding
this announcement should be directed to the Contract Negotiator.
Foreign participation at the prime contractor level is not authorized
for this effort. See Note 13, 26. (0092) Loren Data Corp. http://www.ld.com (SYN# 0192 19970404\16-0008.SOL)
16 - Aircraft Components and Accessories Index Page
|
|