99th Contracting Squadron, 5865 Swaab Blvd, Nellis AFB, NV 89191-7063

J -- REWORK GOVERNMENT SUPPLIED CLAY CONTROL VALUES SOL F26600-97-Q-0533 DUE 043097 POC MSgt Weathers, Contracting Specialist, 702-652-9337; TSgt Grigsby Work consists of providing all labor, equipment, tools, materials, transportation, supervision, and all other items necessary to perform rework on government supplied Cla-Val control valves. The Contractor shall be responsible for providing complete and usable control values upon the completion of work. Controls values shall be shipped through government channels to the contractor for performance of work at the contractor's work site. The contractor shall sandblast the control values body/cover, install new Diaphragm, pilots, tubing, fitting's, fuel test control value and adjust as necessary. Clay values shall be electroless nickel plated. Trim one (1) back pressure control value 6", Serial No. 51AF-2C-1. Government provided value body. Trim four (4) pump control values 6", Serial No. 40-30 AGS. Government provided value body. Trim four (4) filter separator control values 6", Serial No. 40-28 AGS. Government provided value body. Contractor shall provide and trim four (4) high level control values 6", Serial No. 413-01G. Trim four (4) high level control values 4", Serial No. 413-01G. Government provided value body. Contractor shall provide four (4) orifice plate assembly for 6" pump control value. Contractor shall provide four (4) orifice plate assembly for 6" filter separator control value. The contractor shall provide a representative that shall perform on site operational testing of valves, during value installation, which will be performed by the government. Operational testing will require two working days. The government technical representative will notify the contractor as soon as values are received via shipping, to coordinate the above requirements. The contractor shall provide warranties on new equipment. Special care shall be exercised by the contractor not to disturb or damage government supplied control valves. The contractor shall accomplish all work according to county, state, and federal standards, codes, and laws. With submission of an offer, the contractor shall provide descriptive literature (e.g., catalog cuts, manufacturer's specification literature, etc.) of the major elements proposed to accomplish the work. Determination of technical qualifications will be determined by base Civil Engineers. Such items shall include, but not necessarily be limited to the work specified above and a proposed warranty document. Upon award, such submittals will be incorporated by reference in the award document and have the same force and effect as having been incorporated in full text. (0094)

Loren Data Corp. http://www.ld.com (SYN# 0047 19970408\J-0013.SOL)