|
COMMERCE BUSINESS DAILY ISSUE OF APRIL 24,1997 PSA#1831ANNISTON ARMY DEPOT, DIRECTORATE OF CONTRACTING, 7 FRANKFORD AVE,
ANNISTON AL 36201-4199 34 -- UNIVERSAL CYLINDRICAL GRINDER SOL DAAC01-97-R-0010 DUE 050597
POC Contract Specialist RITA DINGLER (205) 235-6027 Contracting Officer
CATHY C. HIGGINBOTHAM (205) 235-7323 (Site Code DAAC01) The cylindrical
grinding machine shall be the manufacturer's current pro duction model,
complete and ready for installation at Anniston Army Depot. The
cylindrical grinding machine shall be capable of external and internal
grinding. Operation of the cylindrical grinding machine shall be by
manual control of the operator. The cylindrical grinding machine shall
not be a computer controlled (CNC) machine. Computer or semi-computer
controlled machines will not be considered acceptable. The grinding
machine shall meet the following size and capacity requirements. Where
a range of values is given, the machine shall be capable of operating
at or above the minimum value and at or below the maximum value in the
range. The space require ments of the grinding machine, when installed
in the shop, shall not exceed 15'L X 8' W X 8' H, rated swing diameter
shall be 14 to 16 inches, the maximum distance between centers shall
not be less than 30 inches, the table shall swivel so that the
headstock rotates not less than9 degrees away from the wheelhead and 3
degrees toward the wheelhead. A minimum of three (3) grinding wheels
shall be provided with the grinding machine. The grinding machine shall
include a recirculating coolant system with a reser voir. The grinding
machine shall operate on 220/440 volt, 3 phase, 60 hertz input power
and include standard equipment such as hand tools, spare parts, or
other items required for operation of the grinding machine. This
procurement is subject to the availability of funds. Quantity (2 each).
Equipment is to be delivered by the contractor to Anniston Army Depot,
Anniston, AL 36201-4199 within 180 calendar days after contract award.
All responsible sources may submit an offer which shall be consid ered.
Requests for the solicitation must be in writing. Faxes are accept able
at (205) 235-6353. No telephonic request will be acknowledged. (0112) Loren Data Corp. http://www.ld.com (SYN# 0207 19970424\34-0004.SOL)
34 - Metalworking Machinery Index Page
|
|