Commander, U.S. Army Missile Command, Acquisition Center, Redstone Arsenal, AL 35898-5280

66 -- OPTICAL POWER TEST SET SOL DAAH01-97-T-0713 DUE 052897 POC Contact Jennifer Davis, Contract Specialist, (205) 842-8283, Shirley Hill, Contracting Officer, (205) 842-7436. (PCF). This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation, proposals are being requested and a written solicitation will not be issued. (ii) The solicitation number DAAH01-97-T-0713 is hereby issued as a Request for Quotation (RFQ). (iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 90-39. (iv) This acquisition is Unrestricted. (v) DESCRIPTION OF REQUIREMENTS FOR THE ITEMS TO BE ACQUIRED: Quantity of three (3) Dual Channel Optical Power Meter to provide precision absolute and relative optical power/attenuation measurement from 800 nm to 1650 nm wavelength with the following characteristics: 1. WAVELENGTH RANGE: 800 to 1650 nm Minimum. 2. WAVELENGTH SELECTION: 1 nm steps minimum over 800 to 1650 nm. Internal automatic wavelength compensation to allow direct absolute optical power measurement over 800 to 1650 nm. User-insertable calibration factors from the front panel with 0.01 dB resolution minimum. 3. POWER/ATTENUATION MEASUREMENT RANGE: 0 dBm to -70 dBm minimum. 4. POWER/ATTENUATION MEASUREMENT DISPLAY: Dual Channel. 5. POWER/ATTENUATION MODES: dB, dBm, Watts 6. POWER/ATTENUATION MEASUREMENT RESOLUTION: 0.01 dB, 0.01 dBm, 1% W Minimum. 7. POWER/ATTENUATION MEASUREMENT NONLINEARITY: 1% Maximum over 0 to -70 dBm range. 8. POWER/ATTENUATION MEASUREMENT TOTAL UNCERTAINTY: +6% (0-70 dBm, 0 degrees C to 45 degrees C, 1000 nm to 1650 nm, N.A. 0.2). 9. POWER/ATENUATION MEASUREMENT CALIBRATION INTERVAL: 360 days. 10. POWER/ATTENUATION MEASUREMENT FIBER TYPE: 9/125 um to 100/140 um, N.A. 0.3. 11. POWER/ATTENUATION MEASUREMENT OPTICAL FIBER INPUT CONNECTOR: Detachable interface connector adaptors including Biconics, FC-PC, ST, SMA 906, and HMS-10/HP shall be provided. Other standard connector adaptors shall be available. 12. PHYSICAL WEIGHT: 6 pounds, maximum. 13. PHYSICAL SIZE: 10"H x 20"W x 20"D, maximum. 14. PHYSICAL POWER: 110-240 Vrms, +10%, 50-65 Hz. 15. ENVIROMENTAL STORAGE TEMPERATURE: -30 degrees C TO +70 degrees C. 16. ENVIROMENTAL OPERATING TEMPERATURE: 0 degrees C TO +55 degrees C. 17. ENVIROMENTAL HUMIDITY: 90% R.H. from 0 degrees C to 40 degrees C. DOCUMENTATION: 1 EACH USER MANUAL. (vi) All items shall be delivered within 90 days after contract award. Earlier delivery is acceptable and desirable at no additional cost to the Government. Deliveries shall be F.O.B. Destination, to 81 SUPS LGS, 517 L ST RM 113H, KEESLER AFB, MS 39534-2120. Inspection/Acceptance shall be at DESTINATION. (vii) The FAR provisions at 52.212-1, Instructions to Offerors-Commercial Items is applicable. (viii) FAR 52.212-2, Evaluation-Commercial Items is applicable. (ix) The offeror shall include a complete copy of the FAR provisions at 52.212-3, Offeror Representations and Certifications-Commercial Items. (x) FAR 52.212-4, Contract Terms and Conditions-Commercial Items, is applicable. The Government intends to award a contract resulting from this solicitation to the responsible, responsive, technically acceptable, and lowest priced offeror whose offer conforms to the solicitation and will be most advantageous to the Government. (xi) FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items is applicable. (xii) Offers are due 28 May 97, 2:00 p.m. local time. The proposal must be signed by an official authorized to bind your organization. You must submit two (2) copies to: U.S. Army Missile Command, AMSMI-AC-CFFB/Ms. Jennifer Davis, Redstone Arsenal, AL 35898-5280, Solicitation DAAH01-97-T-0713. Offers may be submitted on letterhead stationary and, at a minimum, must show: (1) the solicitation number, (2) the time specified in the solicitation for the receipt of offers, (3) the name, address, and telephone number of the offeror, (4) a technical description of the items being offered in sufficient detail to evaluate compliance withthe requirements in the solicitation. This may include product literature, or other documents, if necessary, (5) terms of any express warranty, (6) price and discount terms, (7) "remit to" address, if different from the mailing address, (8) a complete copy of the representations and certifications, (9) if the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Offers that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration. Information regarding this solicitation can be obtained from Ms. Jennifer Davis, (205) 842-8283. All responsible sources may submit a quotation which, if timely received, shall be considered by the agency. Request solicitation package from address above, ATTN: AMSMI-AC-CFFB!. (0120)

Loren Data Corp. http://www.ld.com (SYN# 0329 19970502\66-0022.SOL)