|
COMMERCE BUSINESS DAILY ISSUE OF MAY 9,1997 PSA#1842DOC; Mountain Administrative Support Center; Acquisition Management
Division; 325 Broadway MC3; Boulder, CO 95 -- FERRITE STANDARDS SOL NB853-703247DT POC Doris Turner,
Purchasing Agent, (303) 497-3872; FAX: (303) 497-3163 E-MAIL: NOAA;
MASC Acquisition Management, Joyce.J.Mills@noaa.gov. The National
Institute of Standards and Technology (NIST) proposes to negotiate on
a sole source basis with Mladis Company/CNIITMASH, Russia to provide 28
sets of ferrite standards (cast of stainless steel) that will be
certified through magnetic measurements at NIST. The specimens are
machined from special, cylindrically chill-cast rings of various
compositions. The chill casings produce a very fine, uniform
microstructure. The magnetic measurements will be made on a face normal
to the solidification direction. NIST will assign a ferrite number (FN)
to each specimen following the procedure of AWS Standard A4.2-91
"Standard Procedures for Calibrating Magnetic Instruments to Measure
the Delta Ferrite Content of Austenitic and Duplex Austenitic-Ferritic
Stainless Steel Weld Metal." The set of specimens for the low range
consists of 8 specimens distributed over the range of 0 to 30 FN, and
the set for the high range ferrite content consists of 8 specimens
distributed over the range of 30 to 100 FN. It is not the intent of the
Government to issue a separate solicitation for this requirement.
Interested sources proposing to supply an equivalent item must submit
a written qualification statement by fax, clearly establishing
capability to meet the above requirements within 15 days from the date
of this synopsis. In the absence of other qualified sources, it is the
intent of the government to negotiate a sole source contract under the
authority of 41 U.S.C. 253 (c) (1) with Mladis Company/CNIITMASH,
Russia as this source is considered to be the only known qualified
source which will satisfy agency requirements. (0126) Loren Data Corp. http://www.ld.com (SYN# 0283 19970509\95-0001.SOL)
95 - Metal Bars, Sheets and Shapes Index Page
|
|