Regional Contracting Department, Fleet & Industrial Supply Center, Box 300, Pearl Harbor, HI 96860-5300

95 -- ALUMINUM FLANGES DUE 062097 POC Mary McFeely, (808) 474-2397 Ext. 230, Contracting Officer Sources sought to provide ventilation system flange spool pieces. Flanges shall be constructed of .125 inch thick aluminum; have continuous welded seams both internally and externally; be free of sharp edges and burrs. Bolt holes shall be equally spaced. Four different sizes may be required as follows: 4 inch flange, outside diameter 6-3/8 inch, inside diameter 4 inch, bolt circle diameter 5-1/8 inch, with 5 each 5/16 inch bolt holes; 6 inch flange, outside diameter 8-3/16 inch, inside diameter 6 inch, bolt circle diameter 7-1/2 inch, 9 each 5/16 inch bolt holes; 8 inch flange, outside diameter 10-3/16 inch, inside diameter 8 inch, bolt circle diameter 9-1/8 inch, 9 each 5/16 inch bolt holes; 12 inch flange, outside diameter 14-5/8 inch, inside diameter 12 inch, bolt circle diameter 13-1/2 inch, with 12 each 5/16 inch bolt holes. Provide quantity price break information (for example 25, 50, 100 each) and minimum quantities. Facsimile responses are requested to submitted to (808) 471-5750. Telephone responses will not be accepted. Your response is requested no later than 20 June 1997. (0164)

Loren Data Corp. http://www.ld.com (SYN# 0334 19970617\95-0001.SOL)