|
COMMERCE BUSINESS DAILY ISSUE OF JUNE 26,1997 PSA#1875Malcolm Pirnie, Inc.; One International Boulevard; Box 601; Mahwah, NJ
07430-0601 T -- PHOTOGRAMMETRY SERVICES, AND AERIAL PHOTOGRAPHIC SERVICES
REGARDING THE PREPARTION OF PLANIMETRIC MAPS AND LAND SURVEYS,
CADASTRAL SERVICES (NON-CONSTRUCTION), REGARDING THE PERFORMANCE OF
LAND SURVEYS (OPTIONAL) SOL 8001-230-MAP DUE 072297 POC Steven T.
McNulty, Engineer, (201) 529-4700, Ext. 202 PLANIMETRIC MAPPING AND
SURVEYING (OPTIONAL) SERVICES TO BE PERFORMED AT THE WELSBACH/GENERAL
GAS MANTLE SITES SUPERFUND SITE, CAMDEN AND GLOUCESTER CITY, CAMDEN
COUNTY, NEW JERSEY: USEPA Contract No. 68-W9-0051. INVITATION FOR BID
NO. 8001-230-SUR. POC: Steven T. McNulty, (201) 529-4700 Ext. 202, FAX
(201) 529-0823. Bids for the planimetric mapping and surveying
(optional) services for the Welsbach/General Gas Mantle Sites (WGGM),
a Superfund (NPL) hazardous waste site in Camden and Gloucester City,
Camden County, New Jersey, will be received by the ENGINEER, Malcolm
Pirnie, Inc., One International Boulevard, Box 601, Mahwah, NJ
07430-0601, until 3:00 p.m. local time on Tuesday July 22, 1997 at
which time and place, the bids will be privately opened. Bids received
after the stated date and time will not be considered consistent with
applicable FAR/EPAAR provisions. Bids received through the mail shall
be made in accordance with FAR 52.214-7 and will be accepted by the
ENGINEER in accordance with FAR 52.214-7. FAXED Bids will not be
accepted. The WGGM site is comprised of five study areas and includes
two former gas mantle manufacturing plants and
residential/vacant/public land parcels. The former General Gas Mantle
Corporation manufactured gas mantles using the radioactive element
thorium. The former Welsbach Company processed monzanite sand to
extract thorium for use in the manufacturing of gas mantles. An aerial
radiological survey of the Camden and Gloucester City area was
conducted in May 1981, in the area surrounding the former locations of
the Welsbach and General Gas Mantle facilities. The survey identified
several areas with radiation levels above natural background levels.
Following the aerial survey, the New Jersey Department of Environmental
Protection (NJDEP) identified approximately 100 properties which were
potentially affected by operations at the former gas mantle facilities.
The majority of these properties were residential. In addition, the
NJDEP identified significant amounts of radioactive contamination
within the building structures, as well as on adjacent grounds, at the
locations of the former gas mantle facilities. Planimetric maps will
be prepared for the five study areas. The planimetric mapping will
consist of preparing a planimetric map at a scale of 1" = 50' using
professional aerial photogrammetric techniques and aerial photography
either obtained by or flown by the CONSULTANT. The planimetric map
shall ha~ve a contour interval of two feet and show all planimetric and
land use features visible in the photographs including buildings,
aboveground tanks, bulkheads, streets and street names, curbs,
driveways, fences, walks, trees, pools, patios, surface water bodies,
and all other site features. The planimetric maps will be digitized
directly at a scale of 1" = 50' with contours at 2' intervals using an
analytical stereo plotting system. All work shall be performed by
skilled technicians under direct supervision of licensed professionals
to meet or exceed National Map Accuracy Standards. If deemed necessary
by Malcolm Pirnie, the Consultant will provide surveyed locations
(northings, eastings, elevations) on the planimetric map of monitoring
well, hydropunch, and borehole locations to be determined by Malcolm
Pirnie, in the State Plane Coordinate System. ~ Horizontal locations
shall be to within +/-0.1 feet; elevations to within +/-0.01 feet. The
planimetric mapping WORK will begin on September 2, 1997 and is
expected to be completed within 60 calender days. The surveying
services are optional and the time frame of completion will be
determined if and when the services are needed by the ENGINEER. Bid
Documents may be examined at the office of Malcolm Pirnie, Inc., One
International Boulevard, Box 601, Mahwah, NJ 07430. Copies of the bid
document may be obtained at the office of the ENGINEER on or after June
23, 1997 between 9:00 a.m. and 3:30 p.m. or by written request mail or
FAX addressed to the POC. The ENGINEER will not be responsible for
full or partial sets of Bid Documents, inc~luding any Addenda~ obtained
from any other source. All Bids shall be made on forms furnished in the
Bid Document and shall be enclosed in a sealed envelope marked on the
outside with "Welsbach/General Gas Mantle Sites Superf~und Site, Camden
and Gloucester City, Camden County, New Jersey, Planimetric Mapping and
Surveying (Optional) Services Bid Enclosed" and addressed as follows:
Malcolm Pirnie, Inc., One International Boulevard, Box 601, Mahwah, New
Jersey 07430-0601, Attention: Steven T. McNulty. The name of the
Bidder, its address shall be plainly marked on the outside of the
package. No exceptions or deviations from the requirements stated in
the bid documents will be considered. To perform this work, the
successful Bidder shall be a licensed State of New Jersey surveyor,
have field personnel 40-hour trained in Hazardous Waste Operations in
compliance with 29 CFR 1910.120(e)(4), and obtain all other licenses
and permits necessary for the WORK as required by Federal, state, and
local statues. Participationby small businesses, small disadvantaged
businesses, and women-owned businesses is encouraged as this
procurement is a set-aside.~~ The ENGINEER will conduct prior to
contract award such investigations as is necessary to determine the
performance record and ability of each Bidder to perform the size and
type of work described in the Bid Documents. Upon request, the Bidder
shall submit such information as deemed necessary by the ENGINEER to
evaluate the Bidder's qualifications. Selection will be based on price
and qualifications of responsible bidders. Before a subcontract is
awarded, compliance with all USEPA requirements specified in the Bid
Documents must be demonstrated and will be subject to USEPA review and
consent. The ENGINEER reserves the right to: (1) reject all Bids or
any Bid not conforming, in the sole opinion of the ENGINEER, to the
intent and purpose of the Bid Documents; (2) postpone the award of the
subcontract, or (3) cancel this solicitation at any time prior to
subcontract award. (0175) Loren Data Corp. http://www.ld.com (SYN# 0089 19970626\T-0001.SOL)
T - Photographic, Mapping, Printing and Publication Services Index Page
|
|