Fleet & Industrial Supply Center, Regional Contracts Dept, Attn: Bid Officer/Code 210A94, 937 N. Harbor Drive, Suite 212, San Diego, CA 92132-0212

52 -- 3D LASER INTERFEROMETER TRACKER SYSTEM ASSOCIATED EQUIPMENT, SOFTWARE, AND EQUIPMENT/SOFTWARE TRAINING SOL N00244-97-Q-9489 DUE 011097 POC Bid Officer, Willie Rodriguez, 619-532-2690/2692, Contracting Officer, Ralph Franchi, 619-532-2568, FAX: 619-532-1088/1089/2347 WEB: Click here to download a copy of the RFQ., http://www.sd.fisc.navy.mil. E-MAIL: Click here to contact the contracting officer via e-mail., ralph_a._franchi@fmso.navy.mil. This is a combined synopsis/solicitation for commercial items prepared in accordance with format in Subparts 12.6 and 13.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation to be issued, proposals are being requested from this announcement, a written solicitation will not be issued. The Request for Quote number is N00244-97- Q-9489. This solicitation and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 46. This solicitation is issued on an unrestricted basis, utilizing Standard Industrialization Classification Code of 3827 with a small business standard of 500 employees. FISC San Diego has a requirement for the following: (1) each Mobile Cabinet, 41"h x 56"l x 28.5"d, lockable 6" wheels, retractable power cord, foam line accessory drawers, 1 storage compartment for a 17" monitor, 15.5" extendible upper shelf, 1000CFM built-in ventilation, 1000VA built-in uninterruptible power supply, all drawers/cabinets are to be individually lockable, P/N: 900760, Leica Inc. (1) each Tooling Ball reflector Kit, P/N: 900800, (5) each Tooling Ball Reflector (TBR), P/N: 575481, (5) each Magnetic Tooling Ball Reflector Holder, 1/2 inch offset, P/N: 575494, (1) each Hidden Point Kit for Tooling Ball Reflector, P/N: 900807, (1) each Surface Probe Reflector Carrier with initial sphere, assorted probes and surface bolts, P/N: 575244, (1) each Surface Probe Cornering Device, 1/5 inch, P/N: 575423, (1) each Surface Probe Tooling Ball adapter, Magnetic, P/N: 575421, (1) each Surface Probe Tooling Ball adapter Non-magnetic, P/N; 575422, (1) each Surface Bolt for sharp tipped probe, 0.125inch diameter shaft, P/N: 575416, (1) each Surface Bolt for sharp tipped probe, 0.1875inch diameter shaft, P/N: 575417, 1 each Surface Bolt for sharp tipped probe, 0.250inch diameter shaft, P/N: 575418. (1) each Surface Bolt for sharp tipped probe, 0.375inch diameter shaft, P/N: 575419, (1) Surface Bolt for sharp tipped probe, 0.500inch diameter shaft, P/N: 575420, Multi-Theodolite Software Package, P/N: MTM- UG, Software package is comprised of: Axyz-MTM Multi-Thedoloite Module software with 1st year maintenance and support, P/N: 575109, T-Links 8 port Comms/Power Unit, P/N: 575427, 8 port interface board w/ 9 pin cable, P/N: 575545. The above listed equipment and software is to be used in conjunction with the Leica Inc., LTD-500, 3 Dimensional Laser Interferometer Tracker System. In addition the following training is required: Basic training for the Leica Inc., LTD-500. Minimum of forty hours is required for a maximum of six personnel, P/N: LTM-IT. Operational training for the Leica Surfacer Software (module P/N: SRF-WIN) is required. Minimum of thirty-two hours is required for a maximum of six personnel, P/N: TRN-BO. All training is to be performed on-site at the requesting government facility. Technical and service is required. Required delivery date is forty-five days ARO (after receipt of order). All deliveries and training to the following address: Naval Aviation Depot, Naval Air Station, North Island, San Diego, CA. 92135. All responsible offerors are to submit current pricing, delivery time, payment terms, cage code, Duns/Bradstreet number, TIN, and all applicable specifications regarding this solicitation. Also required are copies of applicable commercially published price lists pertaining to your companies products that meet the specifications. Inspection and Acceptance will be at Destination. The following provisions and clauses are applicable and are hereby incorporated into the solicitation by reference and will be provided by the contracting officer in full text upon request: FAR 52.212-1, Instructions to Offerors Commercial Items applies. Addendum clause FAR 52.215-18, Facsimile Proposals also applies. Offerors are required to complete and include a copy of the following provisions with their proposals: FAR 52.212-3, Offeror Representation and certifications Commercial Items, FAR 52.212-4, Contract terms and Conditions Commercial Items, FAR 52.211-5, addendum New Material, FAR 52.219-6, Notice of Small Business Set-Aside, FAR 52.212-5, Addendum to FAR 52.212-1, Paragraph (b)(5): Offerors shall provide an express warranty which at a minimum shall be the same warranty terms, including offers of extended warranties, offered to the general public. Express warranties shall be included in the contract. The clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Commercial Items applies with the following applicable clauses for paragraph (b): FAR 52.222-26, Equal Opportunity, FAR 52.222-35, Affirmative Action for Special Disabled and Vietnam Era Veterans; FAR 52.222-36, Affirmative Action for Handicapped Workers; FAR 52.222-37, Employment Reports on Special Disabled Veterans and Veterans of the Vietnam Era; DFARS 252.225-7001, Buy American Act and Balance of Payment Program; DFARS 252.225-7008, Supplies to be Accorded Duty-Free Entry, DFARS 252.225-7012, Preference for Certain Domestic Commodities. The government intends to make a single award of a Firm Fixed Price Order to the responsible offeror whose bid provides the best value to the government. Quotations from responsible offerors and inquiries may be faxed to the Bid Officer 619-532-1088/1089 or Contracting Officer 619-532-2347. Quotes must be received no later than 4:00 p.m. (PDT) 7/09/97, and will be accepted by fax or e-mail (ralph_a._franchi@fmso.navy.mil) Do not mail in your response unless instructed to do so. (0176)

Loren Data Corp. http://www.ld.com (SYN# 0266 19970627\52-0001.SOL)