Oc-Alc/Dir Of Contracting, 3001 Staff Dr Ste 1ag76a, Tinker Air Force Base Ok 73145-3015

16 -- AIRCRAFT COMPONENTS AND ACCESSORIES POC For copy, N/A,,, For additional information contact Ken Thomason/ Pkc/[405]736-5370 Potential Sources Sought. This is not a request for proposal but is for information only. Contractor Requirements for Signal Data Converter (SDC) LRU P/N 13219765-02. The United States Air Force and the Oklahoma City Air Logistics Center at Tinker AFB, Oklahoma, have a requirement for contractor support in manufacturing, qualifying, and repairing the Signal Data Converter (SDC) for the B-52 Weapon System. Technical Description Signal Data Converter LRU P/N 13219765-02 Stock Class: 1280. The SDC LRU performs the functions of the Servo Control Unit (SCU), Symbol Signal Generator (SSG), and Video Distribution Unit (VDU). It mounts in the present SCU position. It is conduction cooled using compact heat exchangers and requires 220 Watts of power. The motherboard layout consists of 10 circuit card slots with 6 VME bussed slots and 4 general purpose slots. It shall operate continuously at temperatures from -55C to 55C, with intermittent operation for up to 30 minutes at 71C. Interested contractors should submit adequate information/documentation to Charles Larman, LHMA FAX 405-736-5607 to allow the government to determine their ability to participate. Specifically, the contractor must be able to meet the following requirements. The contractor shall have demonstrated the ability to: 1. Manufacture complex electronic devices from government furnished drawings. 2. Perform qualification testing to include thermal, pressure altitude, humidity, vibration, shock and explosive conditions. 3. Fabricate complex wiring harness from government furnished drawings and commit to long term depot level repair support. 4. Possess the ability to support the security requirements of the contract. 5. Maintain accountability of Government equipment assigned to the contract and take action to receive, repair and ship equipment as required. 6. ISO 9000. Preliminary Drawings are available and may be obtained from Allan Oswald/LHRM phone 405-736-5607. He will also entertain any technical questions. (0183)

Loren Data Corp. http://www.ld.com (SYN# 0273 19970708\16-0011.SOL)