|
COMMERCE BUSINESS DAILY ISSUE OF JULY 28,1997 PSA#1896Directorate Of Contracting/Oo-Alc Pko, 6038 Aspen Avenue Bldg 1289 Ne,
Hill air Force Base, Ut 84056-5000 49 -- BLAST UNIT, PORTABLE SOL F42650-97-T-D310 01 POC For copy,
PKOA/Evelyn Stoltz/(FAX)801-777-6528, For additional information
contact Alison Trowbridge/Pkoc/[801]775-2381 The purpose of this
amendment is to update description of solicitation F4265097TD310. The
contractors that have responded to the early solicitation will be given
a copy of the amended solicitation. All new contractor's that request
a copy of the new solicitation will be given a copy. This is a small
business set a-side. NSN: 4940p2624-A, Blast unit, portable bead blast
system, a self contained, trailer mounted plastic media stripping
centilation system with H.E.P.A. filter a portable, trailer mounted,
self-contained plastic media stripping/ventilation system. Portable
aircraft stripping/ventilation system shall include pressure plastic
media blast equipment; media recovery, cleaning and classification
system; dust collection system, ventilation equipment for work
enclosure; and all other controls, piping, valves, etc. required for a
fully operational system. Pressure vessel shall include a 60 psi
maximum pressure relief valve to minimize accidental operation at
higher pressures. The vessel shall have aconical bottom with a slope of
60 degrees. A 6" x 8" handhole with pressure rated cover shall be
provided for maintenance access. All air piping for the pressure vessel
shall be 1 1/4" inside diameter minimum. The contractor shall provide
a low profile "sweep-in" collection hopper connected to the centrifuge
separator 5" minimum diameter vacuum hose. Collection hopper shall be
a minimum 2' w x 2' l x 6" high. Cyclone separator which through
centrifugal action separates the blast media from the conveying air
stream and collects oversized debris in the filter screen and deposits
reusable media into the storage hopper section. Cyclone separator
shall have the capacity to process a minimum of 900 ft per minute.
Media storage hopper shall have a minimum capacity of six (6) ft and
shall be constructed from a minimum 12 gauge sheet steel. Dust
collection system shall be of the dry cartridge type system with
continuous on-line cleaning by high velocity compressed air jets. The
dust collection/ventilation system shall include a H.E. P. A. exhaust
filter to final filter the air before it is exhausted into the
atmosphere of the aircraft repair hangars. The trailer shall provide
space for mounting two (2) Government furnished thirty (30) gallon
steel drums directly below the dust hopper discharge chutes. Retainers
to hold the drums in place during travel shall be provided. The
trailer with all equipment installed shall not exceed 4' -- 6' in width
and 12' in length. Overall height of shall not exceed 12' -6". The
approximate issue/response date will be 28 July 1997. Offers are due 11
Aug 1997. Anticipated award date will be 15 Aug 1997. (0205) Loren Data Corp. http://www.ld.com (SYN# 0398 19970728\49-0001.SOL)
49 - Maintenance Repair Shop Equipment Index Page
|
|