Directorate Of Contracting, Oo-Alc 6050 Gum Lane/Bldg 1215, Hill Air Force Base, Ut 84056-5825

16 -- CYLINDER,ACTUATING, SOL F42630-97-Q-2043 DUE 092497 POC For copy, PKX-2/Pamala Chaffee/(FAX)801-777-7522, For additional information contact Landing Gear/Photo/Likl/[801]777-6501 Item 0001 NSN 1650-00-652-7512LE P/N: 9-61947, Barrel, cylinder act. Steering nose wheel o.d. 2.56 inches. I.d. 2.46 inches Length 12.98 inches. 4340 steel. Heat treat 180-200 ksi. Sources: Loud Engineering & Mfg, Ontario CA; Durable Metal Prod, Minneapolis MN; Hydro/Mil Co, Chatsworth CA; and International Air supply, Van Nuys CA. 262ea. Applicable to: Kc-135. Destn: Hill Air Force Base, Ut 84056-5825. Delivery: 31 Dec 97 262 ea Item 0002 data, 1 lot Qualification requirements: Sources must be qualified prior to being considered for award. The solicitation will contain instructions for obtaining further information on this requirement. The requirements of FAR 9.202(A) have been completed and copies of the qualification requirements and standards may be obtained as described in the solicitation. These qualification requirements apply to line item(s) all The approximate issue/response date will be 04 Sep 97. The anticipated award date will be 24 Sep 97. Written procedure will be used for this solicitation. To: Hydromach Inc, Canoga Park Ca 91304-1416. To: Mirofine Company, Gardena Ca 90249-2928. To: Utah Tool & Die Inc, West Jordan Ut 84084 0969. To: Farwest Special Products Inc, Bellevue Wa 98009-0189. To: L & S Machine Company Inc, Wichita Ks 67277-2264. First article test required. No telephone requests. Only written or faxed requests received directly from the requestor are acceptable. All responsible sources solicited may submit a bid, proposal, or quotation which shall be considered. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements is cited in each individual solicitation. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. Request for copies of solicitations must reference the entire solicitation number, including purchasing office identification number. To expedite your request, limit the number of individual solicitation numbers requested per letter to not more than 10. Don't request information on this requirement until after the issue date. This proposed procurement is under a 100 percent small business set aside, the size standard for which is 1,000 employees. An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor, concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to the source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selectionprocess. Interested parties are invited to call Jack S. Jones if your concerns are not satisfied by the contracting officer (801)777-6991. Data is claimed to be proprietary to Boeing and is protected under the "Government Purpose License Rights" (GPLR). The right of the government, to use that data to purchase this part from additional sources has been established under the "Government Purpose License Rights", settlement agreement in CL. CT.#309-89C., to provide the DOD procuring agencies the use of the data claimed to be proprietary by Boeing for competitive reprocurement of replenishment spares. This part required engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. See Note (s) 1,26. (0227)

Loren Data Corp. http://www.ld.com (SYN# 0207 19970819\16-0009.SOL)