|
COMMERCE BUSINESS DAILY ISSUE OF SEPTEMBER 3,1997 PSA#1922Immigration & Naturalization Service, Procurement Division, 425 I St.,
NW, Room 2208, Washington, DC 20536 N -- PROOF AND FUNCTION BULLET TRAP (PFBT) DUE 090897 POC Joan Bennett
(202) 514-2062 THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL
ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6, AS
SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS
ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION. BIDS ARE BEING
REQUESTED AND A WRITTEN SOLICITATION WILL NOT BE ISSUED. THE FOLLOWING
REPLACES DESC SHOWN IN SUBMISSION NO. 116374. The Proof and Function
Bullet Trap (PFBT) must include the following: Target area shall be no
less than 48" square; Bullet impact area shall be rated to .600 nitro
express; Bullet trap shall prove a means of capturing the projectiles
safely & without health and environmental problems; Unit shall be
designed to capture projectiles from pistols, rifles, and shotguns
without a degradation of the impact area. Velocity rating shall be from
10 to 3,500' per second; Unit shall provide a means of recovering the
spent projectiles in an environmentally safe manner; Maintenance of
unit shall be extremely low; Unit shall be no largerthan 5' wide, 9'
high and 15' long; Unit shall be constructed in such a manner that will
not allow the projectile or pieces of the projectile to come back to
the shooter; Unit shall be able to be installed in an existing 24x8x12'
room; Unit or assembly must be able to pass thru a 34" hallway and make
a 90 degree turn through a 35x83" doorway; Vendor shall deliver all
equipment and provide equipment protection during transit and job
storage; Vendor shall be responsible for assembly installation of
entire unit; Vendor shall be responsible for all electrical wiring if
required; Vendor shall be responsible for any damage incurred to the
walls or ceiling during installation of unit. Vendor may use the
ceiling to attach hoists or lifting devices but assumes the
responsibility for any damage that may incur and must repair the damage
to the satisfaction of office Administrator. There shall be a 2 year
warranty on this machine. The warranty shall include coverage for all
parts, labor and maintenance for 2 years. (0241) Loren Data Corp. http://www.ld.com (SYN# 0081 19970903\N-0003.SOL)
N - Installation of Equipment Index Page
|
|