|
COMMERCE BUSINESS DAILY ISSUE OF SEPTEMBER 5,1997 PSA#1924Directorate Of Contracting, Oo-Alc 6050 Gum Lane/Bldg 1215, Hill Air
Force Base, Ut 84056-5825 13 -- TIME DELAY SOL F42630-97-R-2059 DUE 102397 POC For copy,
PKX-2/Pamala Chaffee/(FAX)801-777-7522, For additional information
contact Genee Ringel/Likm/[801]775-2093 Item 0001 NSN
1377-00-062-0203ES P/N: 817968-1, Acft ejection system (life support)
ballistic device. Predominant mat: aluminum. Dimensions: 4. 370" X 2.
040". Provides time delay during ejection sequence. Explosive charge.
0018 lbs. 11ea. Applicable to: F-111. Destn: FMS Countries. Delivery:
31 Aug 98 11 ea Item 0002 NSN 1377-00-062-0219ES Flsc Assy P/N:
807317-701, Acft ejection system (life support)ballistic device.
Predominant mat. Aluminum/ Shape charge with explosivcharge of. 0370
lbs. Length 100", Width 1.50",height .30" and is ballistically
initiated. 2ea. Applicable to: F-111. Destn: FMS Countries. Delivery:
31 Aug 98 2 ea Item 0003 NSN 1377-00-062-0221ES Flsc Assy P/N:
807317-702, Acft ejection syst (life support) balistic device
predominate matl aluminum, used to replace time change components
within egress system that are ballistically initiated. 4ea. Applicable
to: F-111. Destn: FMS Countries. Delivery: 31 Aug 98 4 ea Item 0004
NSN 1377-00-135-0361ES Initiator, Time Delay P/N: 819821-1, Acft
ejection system (life support) ballistic device. Predominant mat:
aluminum with explosive charge of 2655 mg. Length 4. 37", height 1.03",
width 3.98" and is ballistically initiated. 11ea. Applicable to: F-111.
Destn: FMS Countries. Delivery: 31 Aug 98 11 ea Item 0005 NSN
1377-00-489-7476ES Initiator, Time Delay P/N: 819822-1, Acft ejection
system (life support) ballistic device. Predom material: aluminum with
3.0 sec delay. Length 4. 392", NEW 0.0022 lbs and is ballistically
initiated. 11ea. Applicable to: F-111. Destn: FMS Countries. Delivery:
31 Aug 98 11 ea Item 0006 NSN 1377-00-971-6411ES Initiator, Time Delay
P/N: 819823-1, Acft ejection sys (life support) ballistic device.
Predominant mat: aluminum with explosive charge of. 0059 lbs
ballistically functioned. Length 4.36", width 3.98", height 1.03".
11ea. Applicable to: F-111. Destn: FMS Countries. Delivery: 31 Aug 98
11 ea Qualification requirements: Sources must be qualified prior to
being considered for award. The solicitation will contain instructions
for obtaining further information on this requirement. The
requirements of FAR 9.202(A) have been completed and copies of the
qualification requirements and standards may be obtained as described
in the solicitation. These qualification requirements apply to line
item(s) all There are 8 additional items(s) in FSC(s) 1377 The
approximate issue/response date will be 23 Sep 97. To: Teledyne
Mccormick Selph, Hollister Ca 95024 0006. No telephone requests. Only
written or faxed requests received directly from the requestor are
acceptable. All responsible sources solicited may submit a bid,
proposal, or quotation which shall be considered. Authority: 10 U.S.C.
2304(C)(1), Justification: Supplies (or Services) required are
available from only one or a limited number of responsible source(s)
and no other type of supplies or services will satisfy agency
requirements. The proposed contract action is for supplies and services
for which the Government intends to solicit and negotiate with only
one, or a limited number of sources under the authority of FAR 6.302.
Interested persons may identify their interest and capability to
respond to the requirement or submit proposals. This notice of intent
is not a request for competitive proposals. However, all proposals
received within forty-five days (thirty days if award is issued under
an existing basic ordering agreement) after date of publication of this
synopsis will be considered by the Government. A Determination by the
Government not to compete this proposed contract based upon responses
to this notice is solely within the discretion of the Government.
Information received will normally be considered solely for the purpose
of determining whether to conduct a competitive procurement. Award will
be made only if the offeror, the product/service, or the manufacturer
meets qualification requirements at the time of award in accordance
with FAR clause 52.209-1. The solicitation identifies the office where
additional information can be obtained concerning qualification
requirements is cited in each individual solicitation. It is suggested
that small business firms or others interested in subcontracting
opportunities in connection with the described procurement make contact
with the firm(s) listed. Request for copies of solicitations must
reference the entire solicitation number, including purchasing office
identification number. To expedite your request, limit the number of
individual solicitation numbers requested per letter to not more than
10. Don't request information on this requirement until after the issue
date. An Ombudsman has been appointed to hear concerns from offerors or
potential offerors during the proposal development phase of this
acquisition. The purpose of the Ombudsman is not to diminish the
authority of the program director or contracting officer, but to
communicate contractor, concerns, issues, disagreements, and
recommendations to the appropriate government personnel. When
requested, the Ombudsman will maintain strict confidentiality as to the
source of the concern. The Ombudsman does not participate in the
evaluation of proposals or in the source selection process. Interested
parties are invited to call Jack S. Jones if your concerns are not
satisfied by the contracting officer (801)777-6991. See Note (s) 26.
(0246) Loren Data Corp. http://www.ld.com (SYN# 0144 19970905\13-0002.SOL)
13 - Ammunition and Explosives Index Page
|
|