NASA/George C. Marshall Space Flight Center, Procurement Office, Marshall Space Flight Center, AL 35812

66 -- OPTICAL BENCH EQUIPMENT SOL 8-P-7-16-B6856 POC Janice M. Stewart, Contract Specialist, Phone (205) 544-6093, Fax (205) 544-9080, Email janice.stewart@msfc.nasa.gov -- Teresa A. Foley, Contracting Officer, Phone (205) 544-0335, Fax (205) 544-9080, Email teresa.foley@msfc.nasa.gov WEB: Click here for the latest information about this notice, http://procurement.nasa.gov/EPS/MSFC/date.html#8-P-7-16-B6856. E-MAIL: Janice M. Stewart, janice.stewart@msfc.nasa.gov. NASA/MSFC plans to issue a Request for Quotation (RFQ) for Optical Bench equipment to include the following. Item 1. Electrostrictive controller & actuators, NC P/N ESA-CXA-SET Specifications: a) coarse travel = 13mm, (b) fine travel = 10 micro meters, (c) linearity<5%, (d) load capacity 20 lb, (e) hysteresis<7%, Quantity 1 ea. Item 2. Thermoplastic plate, NC P/N HC-301 Specifications: (a) minimum of 300 exposures per plate, (b) sensitized area .3 X .3 cm, (c) compatible with Newport HC-300 camera, (d) 800 cycles/mm, Quantity 3 ea. Item 3. Damped rod, NC P/N 45 Specifications: (a) l = 14 inches, (b) dia = 1.5 inches, (c) must have highest possible damping coefficient, Quantity 5 ea. Item 4. Magnetic base, NC P/N 150 Specifications: (a) tamper-proof lockdown, (b) high loading force 200 lb, (c) low profile, Quantity 3 ea. Item 5. Magnetic base, NC P/N 200 Specifications (a) tamper-proof lockdown, (b) high loading force 300 lb, (c) low profile, Quantity 2 ea. Item 6. Magnetic base, NC P/N MB2 Specifications: (a) tamper-proof lockdown, (b) high loading force 90 lb, (c) low profile, Quantity 5 ea. Item 7. Universal mounting platform, NC P/N 300-P Specifications: (a) L shaped platform, (b) double bored platform, Quantity 4 ea. Item 8. Vernier micrometer, NC P/N SM-50 Specifications: (a) .01 mm graduations, (b) 50 mm travel, Quantity 6 ea. Item 9. Vernier micrometer, NC P/N SM-13 Specifications: (a) .01 mm graduations, (b) 13 mm travel, Quantity 5 ea. Item 10. Fine adjustment screws, NC P/N AJS-2 Specifications: Resolution <1 micro meter, Quantity 3 ea. Item 11. Differential micrometer, NC P/N DM-13 Specifications: (a) course travel 13 mm, (b) fine travel .2 mm, (c) course graduations .01mm, (d) fine graduations .0005 mm, (e) accuracy better than 1 %, Quantity 2 ea. Item 12. Two axis platform translation stage, NC P/N 401 Specifications: (a) .5 inch travel, (b) 100 lb load capacity, Quantity 1 ea. Item 13. Multi-function optical meter, NC P/N 1835-C Specifications: (a) power sensitivity 100 fw to 1 kw, (b) energy sensitivity 10 fJ to 10 J, (c) 2500 data point storage buffer, Quantity 1 ea. Item 14. Low power detector, NC P/N 818-SL/CM Specifications: (a) spectral range .4-1.1 micro meter, (b) accuracy +/-3 % .78-1.7 micro meter, (c) risetime <2 micro sec, Quantity 1 ea. Item 15. Low power detector, NC P/N 818-UV/CM Specificatons: (a) spectral range .25-1.1 micro meter, (b) accuracy +/-4 % .25-.26 micro meter, (c) risetime <2 micro sec, Quantity 1 ea. Item 16. Accessory shelf, NC P/N AS-1568 Specifications: (a) 15 X 68 X 2 in size, (b) load capacity = 100 lb, Quantity 1 ea. Item 17. Beam steering element, NC P/N 670-RTC Specificatons: (a) fine elevation range -20 degrees to 7 degrees, (b) fine azimuth angle resolution 8 arc sec, Quantity 1 ea. Item 18. Elliptical mirror, NC P/N 13E20BD.1 Specifications: (a) major axis = 1.838 inches, (b) minor axis = 1.300 inches, (c) optical figure = lamda/10, (d) thickness = .369 inches, Quantity 4 ea. Item 19. BK7 beamsplitter, NC P/N 20B20BS.1 Specifications: (a) clear aperture 80 % of od, (b) usable range 480-700 nm, (c) figure lamda/10, (d) scratch & dig 15-5, Quantity 2 ea. Item 20. 1 inch diameter mirror, NC P/N 10Z20ER.1 Specifications: (a) clear aperture 80 % of od, (b) figure lamda/10, (c) scratch & dig 15-5, Quantity 4 ea. Item 21. Multi-axis point to point motion controller/driver, NC P/N MM3000-OPT797979NNNNN2NNN Specifications: (a) front panel operation, (b) programmable complex motion, (c) 10 bit resolution analog input, (d) runs all Newport motorized stages, Quantity 1 ea. Item 22. Laser goggles, NC P/N G-LGS-A Specifications: (a) argon luminous trans 45%, (b) neon-nitrogen luminous trans 70%, Quantity 5 ea. Item 23. Laser goggles, NC P/N G-LGS-HN Specifications: (a) helium neon luminous trans 20%, (b) ruby luminous trans 20%, Quantity 5 ea. Item 24. Iris diaphragm, NC P/N ID-1.5 Specifications: (a) max id 41.3 mm, (b) min id 2.4 mm, (c) continuous aperture control, Quantity 5 ea. Item 25. Multi-axis stage, NC P/N 460A-XYZ Specifications: (a) .5inch travel, (b) compatible with Newport manual and motorized actuators, (c) low profile, (d) angular deviation better than 150 micro radians, Quantity 1 ea. Item 26. Fine adjustment screws, NC P/N AJS-0.5 Specifications: (a) resolution <1 micro meter, Quantity 3 ea. Item 27. Low profile translation stage, NC P/N 443 Specifications: (a) precision ball bearing movements, (b) reversible for left or right applications, Quantity 3 ea. Item 28. Miniature ball slide positioner, NC P/N 422-1S Specifications: (a) 1 inch travel, (b) resolution 1 micro meter,(c) load capacity 16 lb centered, (d) load capacity 16 lb vertical, Quantity 2 ea. Item 29. Multi-axis precision translator, NC P/N MT-XYZ Specifications: (a) preloaded dovetail design, (b) integral 80 pitch drives, (c) travel each axis .375 inches, Quantity 2 ea. Item 30. Multi-axis tilt platform, NC P/N 36S Specifications: (a) elevation tilt adjustment, (b) rotation tilt adjustment, Quantity 2 ea. Item 31. Open-loop motorized drive, NC P/N 860A-1, Quantity 2 ea. Item 32. Motorized drive controller, NC P/N 860-C2 Specifications: (a) continuously variable speed control, (b) dynamic braking, (c) 2 axis control, Quantity 1 ea. Item 33. Interconnecting cable, NC P/N 860I-10 Specifications: (a) required to operate item 32, Quantity 2 ea. Item 34. 1 inch mirror mount, NC P/N P100-P2-1 Specifications: (a) high precision adjustment screws, Quantity 4 ea. Note: All part numbers are Newport Corporation's or equal. All items must be compatible with existing Newport equipment. This procurement is being conducted under the Simplified Acquisition Procedures (SAP). NASA/MSFC intends to purchase the items from Newport Corporation, 1791 Deere Avenue, Irvine, California. This sole source is based on system compatibility. The Government intends to acquire a commercial item using FAR Part 12. Interested firms have 15 days from the publication of this synopsis to submit in writing to the identified point of contact, their qualifications/capabilities. Such qualifications/ capabilities will be used solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. Responses received after the 30 days or without the required information will be considered nonresponsive to the synopsis and will not be considered. A determination by the Government to not compete this proposed effort on a full and open competitive basis, based upon responses to this notice is solely within the discretion of the Government. Oral communications are acceptable in response to this notice. All responsible sources may submit an offer which shall be considered by the agency. An Ombudsman has been appointed. See Internet Note "B". (0287)

Loren Data Corp. http://www.ld.com (SYN# 0218 19971017\66-0001.SOL)