Commander, Naval Air Warfare Center Weapons Division, Code 210000D, 1 Administration Circle, China Lake, CA 93555-6100

D -- COMMERCIAL-AUTOTEST AUTOMATED TEST STATIONS SOL N68936-98-R-0012 DUE 120897 POC Brenda J. McQuiston, Contract Specialist, (760) 939-7535 The Naval Air Warfare Center Weapons Division, China Lake, CA intends to enter into negotiations, on an other than full and open competition, with Autotest, San Antonio, Texas to procure three (3) Autotest Automated Test Stations P/N 1103101 and 1103901. The intended use of these test stations is to provide AMRAAM power supply manufacturers and organic depot repair identical qualification and verification test capabilities. These stations will be required to support the testing of AMRAAM missile launcher power supplies. The hardware and software within the three test stations must also be 100% compatible with the three existing Autotest Test Stations currently in operation at the Warner Robbins Logistics Air Center, Robbins AFB, GA. The requirements are listed as the following contract line item numbers (CLIN) item and quantities: CLIN 0001 Each Test Station shall be a unit with the following hardware requirements inside each unit: CPU: Pentium, at a minimum 75 Mhz; Hard drive: at a minimum 500 Mb; Other drives: one internal 3.5 inch CPU parent board: shall be ISA standard Memory: 16 Mb, and expandable at a minimum 32 Mb. Ports: Two serial and one parallel. Monitor: 15 inch non-interacted Super VGA Color monitor with 1024X768 resolution and a .28 DPI rating. Mouse: Microsoft mouse. Keyboard: 101 Dey. GPIB Instruments; HP3547A DMM w/memory; HP8903B 100 Mhz Audio Analyzer; Selftest and Calibration Fixture. CLIN 0002: Each Test Station shall be a unit with the following software requirements inside each unit: Microsoft Windows 95 3.1x and DOS 6.1; APG for Windows 95 with drivers for DMM and audio analyzer; Upgraded test program, listed in parentheses, for use with Windows 95: Autotest's acceptance/qualification test (TYPE-1.TST); Autotest's acceptance/qualification test (TYPE-II.TST); Shortened version of TYPE-1.TST (SPEEDY-1.TST); Shortened version of TYPE-II.TST (SPEEDY-2.TST); Shortened version of AMRAMQ-.TST (AMRAQAMV.TST); Autotest's qualification test (AMRAMQ.TST); Autotest's qualification test for longloading periods (AMEAAMQ-.TST); UTE's acceptable/qualification test (AMRAAM(.TST); Serviceability test and shortened version of TYPE-1.TST (TYYPE1SERV.TST); Serviceability test and shortened version of TYPE-II.TST; Initial test and shortened version of AMEAAMQ-.TST (AMFAST.TST). CLIN 0003: Each Test Station shall be a unit with the following software requirements inside each unit: Upgrade to custom library programs for use with the test programs. Provide password control for system administrator and another password control for users. Provide Selftest and Calibration Fixture Software. Calibration adjustments requiring special instructions and/or operator intervention shall be provided as part of the calibration procedures. For example, calibration adjustments shall be provided for setting the current limit for power supplies 1 and 2 (two power supplies in the test position). CLIN 0004: The manufacturer shall perform integration and validation of all hardware/software. CLIN 0005 Training: The systems manufacturer shall provide an Autotest Engineer for a minimum of one (1) week on site equipment familiarization for Warner Robbins Air Logistics Center personnel. CLIN 0006 Maintenance: The systems manufacturer shall also provide one follow-up, two day, on site, at Warner Robbins Air Logistics Center, Robbins, GA. CLIN 0007 Data Deliverables: Upon completion of integration and verification, the systems manufacturer shall deliver three (3) full drawing packages, to include but are not limited to a listing of all components, system level drawings, hardware documentation, all schematics, APG manuals, and software. Upon completion of training, the systems manufacturer shall deliver one (1) each bond hardcopy of the updated UTS-625, hardware documentation and two (2) each 3.5 floppy disks that contain the software for APG for Windows, Test Programs, Users Functions and Self Test Programs in DOS for each upgraded automated Autotest Test Station. The hardware documentation shall consist of commercial manuals. The software shall include all custom and commercially purchased software that resides on the upgraded computer. The system manufacturer shall provide a standard commercial warranty with a minimum period of 12 months. The system manufacturer shall supply commerical off-the-shelf operation and maintenance manuals for all system components. Delivery will be F.O.B. Destination to Warner Robbins Air Logistics Center, 260 Second Street, Suite 221, Robbins AFB, GA. Responses to this intent to solicit, other than Autotest should be submitted in writing to Naval Air Warfare Center Weapons Center, Code 210000D, Attn: Brenda McQuiston, Contract Specialist, or L. Dell Hledik, Contracting Officer, China Lake, CA 93555-6100 no later than 15 days from the date of this synopsis and shall address your experience and capability to produce the three new Autotest Test Stations, P/N 1103101 and 1103901 which can meet the above stated accuracy and compatibility requirements of the Government and can be delivered within 3 months after award. Questions may be addressed to Brenda McQuiston, Contract Specialist at (760) 939-7535 or L. Dell Hledik, Contracting Officer at (760) 939-3772. (0302)

Loren Data Corp. http://www.ld.com (SYN# 0028 19971031\D-0003.SOL)