GSA, FSS, Tools & Appliances Center (6FES), 1500 E. Bannister Rd, Kansas City, MO 64131

52 -- CALIPERS, DIVIDERS AND DIAL INDICATORS SOL 6FES-B9-970197-S DUE 121897 POC Howard Innis (816) 926-7587 THE PURPOSE OF THIS MODIFICATION IS TO CANCEL LINE ITEMS 2 THRU 5 OF THE ORIGINAL SOLICIATION AND REPLACE THEM WITH THE FOLLOWING LINE ITEMS 2 THRU 5. #2, 5210-00-224-9942, ea, 192, type IV, size 3", T1.1, T2.4, T3.1, T4.1, T5.1, T6.1; #3, 5210-00-221-2091, ea, 340, type IV, size 5", EXCEPTION: paragraph 3.8.7 after first sentence add -- "The other edge of the sliding member shall be graduated in 1/32nds of an inch.", T1.1, T2.4, T3.1, T4.1, T4.3, T5.1, T6.1; #4, 5210-01-117-0468, se, 24, type I, class 1, style A, metric measure, spindle lock, ratchet or friction stop w/ standards, Caliper set shall consist of 6 micrometer calipers with the following sizes & ranges -- 25mm size, 0-25mm range, no standard; 50mm, 25-50mm, yes; 75mm, 50-75mm, yes; 100mm, 75-100mm, yes; 125mm, 100-125mm, yes; 150mm, 125-150mm, yes, T1.2, T2.1, T2.2, T2.4, T3.1, T4.1, T5.1, T6.1; #5, 5210-00-221-1919, ea, 22, type II, class 2, range 1 to 2", graduation of 0.001", T1.2, T2.1, T2.4, T3.1, T4.1, T5.1, T6.1 EXCEPTIONS/SPECIFICATIONS: T1.1-IAW Fed Spec GGG-C-95A, dtd 6/26/87; T1.2-IAW Fed Spec GGG-C-105C, dtd 7/10/87; T1.3-IAW Fed Spec GGG-C-111C, dtd 2/12/87; T2.1-Paragraph 3.9, after "determined", delete ", & the part number"; T2.2-Paragraph 3.10.5.1, after last sentence add: "When the micrometer is set exactly on whole mil readings, both zero graduations on the vernier scale shall coincide with the graduation lines on the thimble."; Paragraph 4.3.8.1, after last sentence add; "At each reading, an additional check shall be made for the co-allignment of both zeros on the vernier scale with the whole mil graduation lines on the thimble IAW the requirements of paragraph 3.10.5.1."; T2.3-Paragraph 3.3.4, second sentence, delete "C-60 to C-65" and substitute "C-58 to C-65". Paragraph 3.3.8, fourth sentence, after "machine cut" add ", laser marked"; T2.4-Details of workmanship shall be IAW the best commercial standards and practices. Paints, coatings, platings & finishes shall be smooth, dry, adherent, continuous & not stained or discolored. Fasteners shall be firmly secured & show no evidence of deformation, cross threading or hazardous burrs. Adhesives & lubricants adequate for their intended purpose shall be properly & neatly applied. Adhesives shall be adequately cured. Wires & cables shall be neatly dressed & shall not be frayed or in contact with sharp edges. Wires & cables insulation shall show no evidence of burns, abrading or pinch marks. There shall be no interference, binding or galling of parts. External & bearing surfaces shall be free of tool & gouge marks, nicks or other surface imperfections. The item shall be clean & free of corrosion & debris (e.g. chips, shavings, slivers) or other foreign material. The item shall be free from manufacturing workmanship defects (e.g. loose, missing binding or misaligned parts, sharp or rough external edges, corners or surfaces) & material workmanship defects (e.g. pits, rips, fins, burrs, tears, nodules, cracks, blisters) which may adversely impact the item's serviceability, durability, safety or appearance; T3.1-Each item (including all items within a set or kit) shall be marked with the manufacturer's name or identifying symbol & the state or country of manufacture unless otherwise specified. All marking shall be engraved, etched, molded, indented or put on with permanent ink in such a manner that it remains clearly legible throughout the life of the item; T4.1-One item shall be preserved & packaged in a unit package designed to protect the item against damage during shipment, handling & storage; T4.2 Plastic in packaging, packing & associated marking materials are prohibited. The definition of plastic shall be as defined in ASTM D883-93; T5.1-The unit packages shall be packed in a close fitting fiberboard box, grade 200 min. The complete pack shall be in compliance with the Uniform Freight Classification & the National Motor Freight Classification; T6.1-All unit, intermediate, exterior shipping containers and palletized or unitized loads shall be marked for delivery to civilian activities IAW FED-STD-123F or for delivery to military activities IAW MIL-STD-129M, as applicable!! ALL OTHER TERMS AND CONDITIONS REMAIN UNCHANGED!! (0343)

Loren Data Corp. http://www.ld.com (SYN# 0208 19971211\52-0001.SOL)