Oc-Alc/Dir Of Contracting, 7858 5th St Ste 1, Tinker Air Force Base, OK 73145-9106

36 -- LASER WIRE MARKING & CUTTING MACH SOL F34650-98-T-2731 00 POC For copy, Roger Raines/Pkoca/[405]739-3743, For additional information contact Roger Raines/Pkoca/[405]739-3743 Solicitation is for one (1) each -- Ultra Violet Laser Wire Marking Machine. The unit must produce a mark resistant to abrasion, hydraulic fluids, aviation fuels, light, and high temperatures. The machine must produce a UV laser mark on non-stick insulations such as Teflon, Tefzel, and FEP. It shall be a fully self contained unit able to process wire from wire wound spools into coiling pan as wire cut segments. It shall be capable of handling single or multiconductor wire from 26 AWG to 1/4" in diameter and wires from 6" long to 330 ft long. It shall be able to process wire at a minimum speed of 22 ft/min marking at 3 mm intercharacter pitch. It shall at a minimum operate with an unpowered de-reeler and the output will be to a coiling pan. The marking system shall operate in sequence with an electrical wire cutter. The unit shall be able to print a minimum of 1 to a maximum of 50 characters per mark. It shall be capable of using the full alphanumeric character set. The operator shall be able to control the identification mark, font size and orientation, character pitch, spacing between marks, batch quantity, and wire length. Data input and activiation shall be from keyboard, floppy disk, or system hard disk. The unit shall be fully enclosed Class 2 laser requiring no gases, no chilling, and no venting, while providing high reliability. It shall req. 208/110 volt supply. Mfr: Spectrum Technologies Ltd, Mfr Code: U9945, P.N. Capris 50 or equal. FAX #(405) 739-7423. (0057)

Loren Data Corp. http://www.ld.com (SYN# 0229 19980302\36-0001.SOL)