Contracting Officer, NDANG/LGC, 1400 28th Ave North, Fargo, ND 58102-1051

70 -- SIGN MAKING SYSTEM SOL DAHA32-98-T0168 DUE 051498 POC Dwight A. Murphy, SMS, Contracting Officer, 701-241-7332 WEB: None, None. E-MAIL: North Dakota Air National Guard, Bstevens@NDFAR.ANG.AF.MIL. General-purpose automatic data processing equipment (including firmware), Software, and support equipment. Sign Making System consisting of the following: 1 ea. Fifteen-inch pin feed plotter, manufactured by Gerber, part number: GS-15 "Or equal". 1 ea. Color scanner manufactured by Hewlett-Packard, part number: HP 6100C "Or Equal". 1 ea. Digital label and decal press manufactured by Fargo Electronics, model: Fargo Impressa, to include the following specifications: Digital diecut technology, continuous-tone, 24-bit color dye sublimation, resin thermal spot and process color, resin/wax thermal spot color, 300 x 300 DPI resolution, Ribbons: Dye-sublimation, resin thermal, resin/wax thermal, 12-inch web depth, 11.71 x 17.3-inch maximum image area, Languages: Windows, Windows 95, Centronics-ECP type parallel standard interface, Pentium 133MHz or higher, 16 MB RAM, ECP parallel port, 200 MB minimum free hard drive space system requirements "Brand Name Request". 1 ea. Software module, manufactured by CADlink Technology Corporation, part number: 500 SLCOL, CADlink Technology Corporation power pack for Gerber GS-15 Plotter "Or Equal". 1 ea. Color Master Software manufactured by CADlink Technology Corporation, part number: 500 SLPPG, Signlab version 5.0. "Brand Name Request" 1ea. Personal Computer, to contain: Intel-Pentium 200 MHz Tower system, 64 MEG RAM, 6.4 G Seagate hard drive, 2 MEG S3 video card, 24X Mitsumi CD ROM, 3.5-inch, 120 MD Super Floppy, Windows 95 keyboard, 33.6 BOCA FAX/Modem, 16 bit sound card, 20 watt amplified speakers, 2 parallel ports, 2 serial ports, Microsoft mouse, Windows 95, 17-inch .26 DOT 1600 x 1280 monitor, 2 year warranty. Technical support: On sight service within two (2) hours of request. Help line: Support provided over the phone to resolve small technical problems. Training: Thirty (30) hours total training in two-hour increments over a period of six (6) months. Training will be scheduled at the discretion of the shop supervisor. Any potential source which feels that they can meet these requirements must notify the Contracting Office in writing, no telephone requests will be accepted, facsimile requests are acceptable, FAX Number is (701) 241-7334. The Government intends to use simplified acquisition procedures. See Note 1. (0104)

Loren Data Corp. http://www.ld.com (SYN# 0266 19980416\70-0004.SOL)