|
COMMERCE BUSINESS DAILY ISSUE OF APRIL 21,1998 PSA#2078GSA, FSS, Tools & Appliances Center (6FES), 1500 E. Bannister Rd,
Kansas City, MO 64131 51 -- PNEUMATIC SCALERS SOL 6FES-G5-980003-N DUE 050798 POC Pamela
Waters PH: (816) 823-1290 Fax: (816) 926-3678 This synopsis will cover
the requirements for these National Stock Numbers for the next twelve
(12) months. We desire Destination pricing for the Contiguous United
States, which will be good for twelve months. This pricing will be used
as a standing price quote for a period up to and including the next
twelve months. Bar coding will be required. Inspection will be at
origin. Delivery 120 DARO. Award will by item by item. The present
requirements are: 5130-00-965-9876 is 438 EA 5130-01-029-8042 is 360
EA. 5130-01-029-8043 is 409 EA. Minimum order Dollar Value $200 If you
plan to quote on these items please request copies of the GSA Purchase
Descriptions by Fax. The fax number is (816) 926-3678 5130-00-965-9876
UI: EA SCALER, NEEDLE TYPE, PNEUMATIC: DESCRIPTION In accordance with
General Services Administration Purchase Description 5130-00-965-9876,
dated November 13, 1997. With the following exception. Performance of
the Chipping test is not required if the Needle Scaler offered has been
previouslytested and listed on the MIL-S-23492 QPL and that model has
not been substantially changed in design. The Manufacturer shall
provide documentation to support this. WORKMANSHIP Details of
workmanship shall be in accordance with the best commercial standards
and practices. Paints, coatings, platings, and finishes shall be
smooth, dry, adherent, continuous, and not stained or discolored.
Fasteners shall be firmly secured and show no evidence of deformation,
cross threading, or hazardous burrs. Adhesives and lubricants adequate
for their intended purpose shall be properly and neatly applied.
Adhesives shall be adequately cured. Wires and cables shall be neatly
dressed and shall not be frayed or in contact with sharp edges. Wire
and cable insulation shall show no evidence of burns, abrading, or
pinch marks. There shall be no interference, binding, or galling of
parts. External and bearing surfaces shall be free of tool and gouge
marks, nicks, or other surface imperfections. The item shall be clean
and free of corrosion and debris (e.g., chips, shavings, slivers) or
other foreign material. The item shall be free from manufacturing
workmanship defects (e.g., loose, missing, binding or misaligned parts,
sharp or rough external edges, corners or surfaces) and material
workmanship defects (e.g., pits, rips, fins, burrs, tears, nodules,
cracks, blisters) which may adversely impact the item's serviceability,
durability, safety, or appearance. PACKAGING One (1) item shall be
preserved and packaged in a unit package designed to protect the item
against damage during shipment, handling, and storage. PROHIBITION OF
PLASTIC PACKAGING AND PACKING Plastic in packaging, packing and
associated marking materials are prohibited. The definition of plastic
shall be as defined in ASTM D883-93. PACKING The unit packages shall
be packed in a close fitting fiberboard box, grade 200 minimum. The
complete pack shall be in compliance with the Uniform Freight
Classification and the National Motor Freight Classification. MARKING
All unit, intermediate, exterior shipping containers, and palletized or
unitized loads shall be marked for delivery to civilian activities in
accordance with latest version of FED-STD-123 or for delivery to
military activities in accordance with latest version of MIL-STD-129,
as applicable. 5130-01-029-8042 UI: EA SCALER, NEEDLE TYPE, PNEUMATIC:
DESCRIPTION In accordance with General Services Administration
Purchase Description 5130-00-965-9876, dated November 13, 1997. With
the following exception. Performance of the Chipping test is not
required if the Needle Scaler offered has been previously tested and
listed on the MIL-S-23492 QPL and that model has not been substantially
changed in design. The Manufacturer shall provide documentation to
support this. WORKMANSHIP Details of workmanship shall be in accordance
with the best commercial standards and practices. Paints, coatings,
platings, and finishes shall be smooth, dry, adherent, continuous, and
not stained or discolored. Fasteners shall be firmly secured and show
no evidence of deformation, cross threading, or hazardous burrs.
Adhesives and lubricants adequate for their intended purpose shall be
properly and neatly applied. Adhesives shall be adequately cured. Wires
and cables shall be neatly dressed and shall not be frayed or in
contact with sharp edges. Wire and cable insulation shall show no
evidence of burns, abrading, or pinch marks. There shall be no
interference, binding, or galling of parts. External and bearing
surfaces shall be free of tool and gouge marks, nicks, or other surface
imperfections. The item shall be clean and free of corrosion and debris
(e.g., chips, shavings, slivers) or other foreign material. The item
shall be free from manufacturing workmanship defects (e.g., loose,
missing, binding or misaligned parts, sharp or rough external edges,
corners or surfaces) and material workmanship defects (e.g., pits,
rips, fins, burrs, tears, nodules, cracks, blisters) which may
adversely impact the item's serviceability, durability, safety, or
appearance. PACKAGING One (1) item shall be preserved and packaged in
a unit package designed to protect the item against damage during
shipment, handling, and storage. PROHIBITION OF PLASTIC PACKAGING AND
PACKING Plastic in packaging, packing and associated marking materials
are prohibited. The definition of plastic shall be as defined in ASTM
D883-93. PACKING The unit packages shall be packed in a close fitting
fiberboard box, grade 200 minimum. The complete pack shall be in
compliance with the Uniform Freight Classification and the National
Motor Freight Classification. MARKING All unit, intermediate, exterior
shipping containers, and palletized or unitized loads shall be marked
for delivery to civilian activities in accordance with latest version
of FED-STD-123 or for delivery to military activities in accordance
with latest version of MIL-STD-129, as applicable. 5130-01-029-8043 UI:
EA SCALER, NEEDLE TYPE, PNEUMATIC: DESCRIPTION In accordance with
General Services Administration Purchase Description 5130-00-965-9876,
dated November 13, 1997. With the following exception. Performance of
the Chipping test is not required if the Needle Scaler offered has
been previously tested and listed on the MIL-S-23492 QPL and that model
has not been substantially changed in design. The Manufacturer shall
provide documentation to support this. WORKMANSHIP Details of
workmanship shall be in accordance with the best commercial standards
and practices. Paints, coatings, platings, and finishes shall be
smooth, dry, adherent, continuous, and not stained or discolored.
Fasteners shall be firmly secured and show no evidence of deformation,
cross threading, or hazardous burrs. Adhesives and lubricants adequate
for their intended purpose shall be properly and neatly applied.
Adhesives shall be adequately cured. Wires and cables shall be neatly
dressed and shall not be frayed or in contact with sharp edges. Wire
and cable insulation shall show no evidence of burns, abrading, or
pinch marks. There shall be no interference, binding, or galling of
parts. External and bearing surfaces shall be free of tool and gouge
marks, nicks, or other surface imperfections. The item shall be clean
and free of corrosion and debris (e.g., chips, shavings, slivers) or
other foreign material. The item shall be free from manufacturing
workmanship defects (e.g., loose, missing, binding or misaligned parts,
sharp or rough external edges, corners or surfaces) and material
workmanship defects (e.g., pits, rips, fins, burrs, tears, nodules,
cracks, blisters) which may adversely impact the item's serviceability,
durability, safety, or appearance. PACKAGING One (1) item shall be
preserved and packaged in a unit package designed to protect the item
against damage during shipment, handling, and storage. PROHIBITION OF
PLASTIC PACKAGING AND PACKING Plastic in packaging, packing and
associated marking materials are prohibited. The definition of plastic
shall be as defined in ASTM D883-93. PACKING The unit packages shall
be packed in a close fitting fiberboard box, grade 200 minimum. The
complete pack shall be in compliance with the Uniform Freight
Classification and the National Motor Freight Classification. MARKING
All unit, intermediate, exterior shipping containers, and palletized or
unitized loads shall be marked for delivery to civilian activities in
accordance with latest version of FED-STD-123 or for delivery to
military activities in accordance with latest version of MIL-STD-129,
as applicable. (0106) Loren Data Corp. http://www.ld.com (SYN# 0286 19980421\51-0001.SOL)
51 - Hand Tools Index Page
|
|