Directorate Of Contracting, Oo-Alc 6050 Gum Lane/Bldg 1215, Hill Air Force Base, UT 84056-5825

13 -- CORD ASSY DET SOL F42630-98-Q-60885 DUE 061598 POC For copy, PKX-2/Pamala Chaffee/(FAX)801-777-7522, For additional information contact Kathy Goss/Likm/[801]775-2094 Item 0001 NSN 1377-01-014-2402ES P/N: 50595-341A, Acft ejection sys (life support) ballistic device. Stainless steel tube around Explosive mix length 11.42in. Diameter 0.191 in. 16ea. Applicable to: Acft Ejection Sys. Destn: Hill Air Force Base, Ut 84056-5825. Delivery: 26 Feb 99 16 ea Item 0002 NSN 1377-01-014-2407ES Cord Assy, Detonating P/N: 50595-355A, P/N 812503-355A Acft ejection sys (life support) ballistic device. Stainless steel Tube arou ND explosive mix. Length 9.02 in, diam 0.191 in. 4ea. Applicable to: F-15. Destn: Hill Air Force Base, Ut 84056-5825. Delivery: 26 Feb 99 4 ea Item 0003 NSN 1377-01-015-9073ES Cord, Shielded Mild Detonating P/N: 50595-209A, P/N 812503-209A Acft ejection sys (life support) ballistic device. Predom matl is stainless ste Ll with explosive charge Length 10.04 in, diam 0.191 in. 11ea. Applicable to: F-15. Destn: Hill Air Force Base, Ut 84056-5825. Delivery: 26 Feb 99 11 ea Item 0004 NSN 1377-01-015-9074ES Cord, Shielded Mild Detonting P/N: 50595-213A, P/N 812503-213A Acft ejection sys (life support) ballistic device. Predominant matl stainless steel with an explosive charge of 0.0006 lbs, length 10.46", dia 0.191" and is ballistic initiated. 9ea. Applicable to: F-15. Destn: Hill Air Force Base, Ut 84056-5825. Delivery: 26 Feb 99 9 ea Item 0005 NSN 1377-01-016-3206ES Cord, Shielded Mild Detonating P/N: 50595-373A, P/N 812503-373A Acft ejection sys (life support) ballistic device. Pred matl is stain 0.0007 lb length 12.52", diam 0.191"", and is ballistically initiated. 41ea. Applicable to: F-15. Destn: Hill Air Force Base, Ut 84056-5825. Delivery: 26 Feb 99 41 ea Item 0006 NSN 1377-01-016-3207ES Cord, Shielded Mild Detonating P/N: 50595-375A, P/N 812503-375AH Acft ejection sys (life support) ballistic device. Predom matl is stainless steel with an explosive charge of 0.0007 lbs, length 16.58", dia 0.191", and is ballistic initiated. Part of egress sys 26ea. Applicable to: F-15. Destn: Hill Air Force Base, Ut 84056-5825. Delivery: 26 Feb 99 26 ea Qualification requirements: Sources must be qualified prior to being considered for award. The solicitation will contain instructions for obtaining further information on this requirement. The requirements of FAR 9.202(A) have been completed and copies of the qualification requirements and standards may be obtained as described in the solicitation. These qualification requirements apply to line item(s) all There are 5 additional items(s) in FSC(s) 1377 The supplier of this item must meet the requirements of drawing 68B710072 cage 76301 The approximate issue/response date will be 26 May 98. The anticipated award date will be 15 Jun 98. Written procedure will be used for this solicitation. To: Teledyne Mccormick Selph, Hollister CA 95024 0006. To: Oea Aerospace Inc, Fairfield CA 94533-0659. No telephone requests. Only written or faxed requests received directly from the requestor are acceptable. All responsible sources solicited may submit a bid, proposal, or quotation which shall be considered. Award will be made only if the offeror,the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements is cited in each individual solicitation. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. Request for copies of solicitations must reference the entire solicitation number, including purchasing office identification number. To expedite your request, limit the number of individual solicitation numbers requested per letter to not more than 10. Don't request information on this requirement until after the issue date. An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor, concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to the source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call Brent W. Kendall if your concerns are not satisfied by the contracting officer (801)777-6991. ATTENTION: Contractor must be registered with Central Contractor Registration by 1 Jun 98 to be eligible for contact award or payment from any DOD activity. Information on registration and annual confirmation requirements may be obtained by calling 1-888-227-2423, or via the Internet at http://ccr.edi.disa.mil This part required engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. This acquisition involves data that are subject to export control laws and regulations. Only contractors who are registered and certified with the Defense Logistics Services Center (DLSC) shall be provided copies of the solicitation or other data subject to foreign disclosure restrictions. Contact the Defense Logistics Services Center, 74 Washington Avenue N., Battle Creek, Michigan 40917-3084 (1-800-352-3572) for further information on the certification process. You must submit a copy of your approved DD Form 2345, Military Critical Technical Data Agreement, with your request for the solicitation. (0127)

Loren Data Corp. http://www.ld.com (SYN# 0145 19980511\13-0001.SOL)