Intergrated Support Command, 4640 Urquhart Street, New Orleans, LA 70117-4698

34 -- HYDRAULIC SHEAR SOL DTCG29-98-Q-3N6021 DUE 060898 POC SK1 Charles Dixon/Contracting Officer (504) 942-4080; FAX (504) 942-4095. Hydraulic shear to meet the following minimum specifications: Hydraulic shear with flat table and at least 24" squaring bar and scale set in machined slots. Machine will cut up to 1/4" mild steel 8' long plate and as thin as 20 guage. Weight should be no greater than 11,000 pounds. The height should be under 84", width under 130", depth under 85" with and including back gauge. Motor should be at least 15 HP 230/460 3 PH 60 TEFC motor with 120 volts controls. Blade knives should be 4 edge shock resistant chrome alloy. Machine will have a 3 position safety foot petal designed to meet ansi-bll standards. Back gauge is to be a 36" power back gage with front controls and counter cut to line shadow line light. Machine should have at least nine hold down cylinders for cutting. Machine should have a 4' front squaring arm with scale. Also have tee-slots 5/8'' milled into table to match two 36" extension arms mounted on front of table. A manifold lubrication system will be included with machine. Price to includeshipping, installation, and training on operation for six employees. Standard additional features should include a high efficiency, low noise, internal pump. Please send us a brochure on your machine for technical comparison. deliver to Commanding Officer, USCG Integrated Support Command, Attn: Weld Shop, 4640 Urquhart Street, New Orleans, LA 70117-4698 (0128)

Loren Data Corp. http://www.ld.com (SYN# 0208 19980512\34-0001.SOL)