Fleet and Industrial Supply Center, Puget Sound, Bldg 467 W Street, Code 200 Bid Desk, Bremerton, WA 98314-0051

39 -- SOLID WASTE RECYCLING SORTING LINE SOL N00406-98-R-5126 DUE 062298 POC Andy Ross, 360-476-7265 Mike Evonick, 360-476-7265 DESCRIPTION/SPECIFICATIONS -- CHECK FOR THE FOLLOWING: NSN, MFG. PART NO., MIL-SPEC, FED SPEC, QPL, SIZE, DIMENSIONS, FORM, FIT, FUNCTION, PREDOMINATE MATERIAL, QUANTITY, OPTION QTY, DELIVERY SCHEDULE/PERIOD OF PERFORMANCE, FOB DESTINATION/ORIGIN: Solid waste recycling sorting line, elevating input conveyor and auxiliary overhead support structure to attach 6000 pound cross-belt magnetic separator. Type: raised modular unit with five sorting stations, five corresponding holding areas, and dual access stairways. Input materials: residential solid waste consisting of glass, paper, plastic, steel/aluminum, wood and organic matter in varying forms and sizes. Material throughput: material throughput: 5454-7272 kg/hr. Conveyor speed: 7.49 m/min. Horsepower output: not specified. Power requirements: 420 volt/50 hertz. Decibel range: not specified. Weight: not specified. Location: Indoors. Starter requirements: automatic, key-initiated system. Control function: soft start control for normal functions (on/off, throughput speed, conveyor speed, etc...) automatic shutdown during jamming or mechanical malfunction, continuous throughput, adjustable speed, manual control for troubleshooting and testing. Control panel: enclosed and located for unobstructed operational viewing. Conveyor belt type: synthetic chain-driven. Conveyor belt width: 1070. Conveyor belt thickness: 7.1,,. Sorting line dimensions: cross-sectional width: 4000mm, height: 4200mm (floor level to top of guard rail), cross-sectional length: 19040mm. Holding bay dimensions: total of five holding bays, Cross-sectional width: 3000mm (centerline to centerline), height: 2350mm (floor level to base of chute). Chute dimensions: Cross-sectional width: 650mm (top) to 500mm (base). height: 1450 mm (top to base). Input conveyor dimensions: conveyor belt, on 30 degree incline, cross-sectional width: 4000mm, crpss-sectional length: 13556mm, height" 6150mm (top to base). Load and design considerations for magnet: a cross-belt electromagnet with hoist is to be suspended above the second bay. The unit, associated components and activated (magnetic) force shall produce a cumulative load not in excess of 6000 pounds. The type of support (fixed joist w/trolley, braced frame, etc...) is not specified. The only design criteria being that the structure be placed over the second holding bay, and that it not interfere with the normal operation of the sorting line. In-put conveyor requirement: When attached to the sorting line, it will be at a fixed angle of 45 degrees. In addition, the stairway to the sorting line be provided on either side. Tolerance for all dimensions, sizes, and designs must be within plus/minus 80mm. The unit must be attached at a 45-degree angle to the left shape between the feed conveyor to the sorting conveyor. On-site (Yokosuka, Japan) installation, training, and maintenance required by the Contractor. Contractor personnel performing on-site tasks must be able to read, speak and understand the Japanese language. FOB Origin for the unit with a required delivery of 160 days after contract award. FOB Destination for on-site tasks with a required performance within 30 days after notification by the Government. ALL RESPONSIBLE SOURCES MAY SUBMIT AN OFFER WHICH SHALL BE CONSIDERED BY FLEET & INDUSTRIAL SUPPLY CENTER, PUGET SOUND. TELEPHONE REQUESTS WILL NOT BE HONORED. FAX REQUESTS WILL MAY BE SENT TO 360-476-2931. (0128)

Loren Data Corp. http://www.ld.com (SYN# 0206 19980513\39-0001.SOL)