Dept of Justice, Fed Prison Industries, 320 1st Street NW -- Material Mgt Branch, Washington, DC 20534-0001

95 -- ANGLE STEEL SOL 1PI-R-1104-98 DUE 070998 POC Chyrel McPherson, Contract Specialist (202)305-7284 This is a combined synopsis/solicitation for commercial items prepared per the format in FAR Subpart 12.6, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation. PROPOSALS ARE BEING REQUESTED AND A WRITTEN SOLICITATION WILL NOT BE ISSUED. Solicitation number for this RFP R-1104-98; is a Request for Proposal(RFP). The following Provisions and Clauses are incorporated into this RFP by reference and are in effect through Federal Acquisition Circular 90-42. This procurement is unrestricted and is being advertised as full and open completion. The Standard Industrial Classification (SIC) code is 3316, with a small business size standard of 1,000 Employees. UNICOR, Federal Prison Industries intends to enter into Requirements type contract for three years. This requirement is for Angle Steel. The estimated maximum quantities are stated with each line item. Line Item 0001, ANS0004, ANGLE STEEL, 1"x 1"X1/8"T20'L, HRLC, OILED, A36. Est. Qty 400 EA. Line Item 0002, ANS008, ANGLE STEEL, 1"X1-3/4"X1/8"TX7' 3" L, HRPO, OILED. Est. Qty 400,000 EA. Line Item 0003, ANGLE STEEL, ANS0009, 1"X1-3/4"X1/8"TX6'3"L, HRPO, OILED. Est. Qty 150,000 EA. Line Item 0004, ANGEL STEEL, ANS0013, 1"X1"X3/16"TX18' L, HRPO, ASTM-A36 Est. Qty 100 EA. Line Item 0005, ANS0014, 1"X1"X3/16"T20'L, HRPO, ASTM-A36 Est. Qty 600 EA. Line item 0006, ANS0015, ANGLE STEEL, 1"X1"3/16"T35-11/32"L, HRPO, ASTM-A36. Est. Qty 300,000 EA. Line Item 0007, ANGLE STEEL, ANS0017, 1"X1"X1/8"T35-11/32" L, HRPO, ASTM-A36. Est. Qty 500,000 EA. Line Item 0008, ANS0043, ANGLE STEEL, 1"X1"X1/8"TX81-5/8"L, CR, ASTM-A569. Est. Qty 70,000 EA. Line Item 0009, ANS0081, ANGLE STEEL, 1"X1-3/4"X1/8"TX8'3"L, HRPO, ASTM-A569. Est. Qty 6,000 EA. Line Item 0010, ANS0083, ANGLE STEEL, 1/8"X1-3/4"X1"X7'0", HRPO, ASTM-A569, Est. Qty 7,000 EA. Line Item 0011, ANS0084, ANGLE STEEL, 1/8"X1"X1-3/4"X6'0", HRPO, ASTM-A569. Est. Qty 2,000 EA. Line Item 0012, ANS0086, ANGLE STEEL, 1"X1"X1/8"TX78"L, RR, ASTM-A499. Est. Qty 6,000 EA. Line Item 0013, ANS0087, ANGLE STEEL, 1"X1"X1/8"X41-11/32"L, HRPO, A-36. Est. Qty 400,000 EA. Line Item 0014, ANS0088, ANGLE STEEL, 1"X1"X1/8"X47-11/32" L, HRPO, ASTM-A36. Est. Qty 300,000 EA. Line Item 0015, ANS0089, ANGLE STEEL, 1"X1-3/4"X1/8"TX9'3"L, HRPO, ASTM-A569. Est. Qty 1,500 EA. Line Item 0016, ANS0091, ANGLE STEEL, 1"X1"X1/8"TX84"L, CR, CQ, ASTM-A569. COLD ROLLED, PICKLED AND OILED. THE SURFACE SHALL BE SMOOTH AND FREE FROM RUST, PITS, FLAKES AND LOOSE SCALE. THE SURFACE OF THE MATERIAL WILL BE EXPOSED IN A PAINTED CONDITION AND MUST PRESENT A SMOOTH APPEARANCE. ALSO MUST BE FREE FROM BURRS AND SHARP EDGES, CAN'T BE BOWED, WARPED OR TWISTED. TOLERANCE OF THE MATERIAL IS +0/-1/16. USED FOR 9217 CABINET ONLY. Est. Qty 8,000 EA. Line Item 0017, ANS0125, ANGLE STEEL, 1"X1-3/4"X1/8"TX48"L, HRPO, ASTM-A569. Est. Qty 2,000 EA. Line Item 0018, ANS0126, ANGLE STEEL, 1"X1-3/4"X1"/8"TX36"L, HRPO, ASTM-A569. Est. Qty 1,000 EA. Line Item 0019, ANS0130, ANGLE STEEL, 3"X4"X3/8"T55"L, HRPO, ASTM-A36. Est. Qty 5,000 EA. Line Item 0020, ANS1136, ANGLE STEEL, 1"X"X1/8"TX59-7/8"L, CR, ASTM-A36. Est. Qty 20,000 EA. Line Item 0021, ANS0016, STRUCTURAL ANGLE STEEL, 1"X1"X1/8"TX18"L, HRPO,ASTM-A36. Est. Qty 1,500 EA. With the exception of line item 0016 the specification for the other line items are as follows: Specification No. A-569, hot rolled, pickled and oiled. Punched per drawing #4349. Available upon request. Length tolerance: +0/-16". Free from rust, scale, and sharp edges. Banded in lifts not to exceed 5000 lbs., with 4'X4' lengthwise hardwood skids for forklift unloading from side of truck. During shipment, items shall be protected from exposure to weather by tarpaulins or other acceptable means. All prices are to be FOB Destination to FCI Terminal Island, CA. (vii) Clauses/provisions: FAR Clause 52.212-1 "Instructors to Offerors-Commercial, " is hereby included by reference. The following are addenda to FAR Clause 52.212-1: Paragraph Period of acceptance of offers; The offeror agrees to hold prices their proposal firm for 60 calendar days from the date specified for receipt of offers. Award may be made to a single offeror or multiple offerors whichever is advantageous to the government. Offerors are advised that awards may be made without discussions. Award will be made to the responsible offeror(s) whose proposal is responsive to the terms of the RFP and is most advantageous to the government. Each offeror is require to provide past performance information for same/similar product, to include 2 most recent contract numbers, points of contact/current telephone numbers, type of product provided. (ix) FAR provision 52.212-2 Evaluation-Commercial Items applies to this solicitation and the following evaluation criteria (arranged in their order of importance) shall be used to evaluate offers: Past Performance and Price. (x) FAR Provision 52.212-3 Offeror Representations and Certifications-Commercial Items shall be completed and submitted with the proposal. (xi) FAR Clause 52.212-4, Contract Terms and Conditions-Commercial Items, hereby applies to this solicitation. (xii) FAR Clause 52.212-5 Contract Terms and Conditions Required to Implement Statues or Executive Order-Commercial Items applies to this acquisition. The following FAR Clauses are hereby incorporated by reference: 52.203-6, 52.222-26, 52.222-35, 52.222-36, 52.222-27. FAR 52.216-19 Delivery Order Limitations -- Delivery order minimum quantity is twenty (20) each and the maximum delivery order amounts are 1,000 (one-thousand) each per delivery order. The required delivery after award of contract is twenty-one (21) calendar days after receipt of order. FPI 1000F2 Time of Delivery/Delivery Schedule (16.505(a) and the clause located in FAR 52.212-18 entitled "Ordering" in this contract, any supplies to be furnished under this contract shall be ordered by the issuance of delivery orders by individuals listed: Contracting Officers at FCI Terminal Island, CA and Washington, DC with the exception of the COTR. Delivery hours are 7:00 a.m.- 11:00 a.m. and 12:00 noon—2:00 p.m., Monday through Friday, excluding Federal Holidays and Institutional Emergencies. Variation In Quantity is Zero Percent (0%) Decrease and Ten Percent Increase (10%). This proposal must be received not later than Thursday, July 9, 1998, 1:00 p.m. Eastern Standard Time and must be mailed to Federal Prison Industries, ATTN: Chyrel McPherson, Contract Specialist. Material Management Branch-7th Floor, 320 First St., NW, Washington, DC 20534. Fax your offer on your company letterhead agreeing to the terms, conditions, clauses and provisions called out in this proposal acceptable to (202)305-7363/365. For information regarding this solicitation contact Chyrel McPherson, Sr. Contract Specialist (202)305-7284. (0173)

Loren Data Corp. http://www.ld.com (SYN# 0316 19980624\95-0001.SOL)