Naval Surface Warfare Center, Code 1163, 300 Highway 361, Crane, IN 47522-5001

36 -- SPECIAL INDUSTSRY MACHINERY SOL N00164-98-Q-0192 DUE 072198 POC Ms. Diane Pearson, code 1163W7, telephone 812-854-5201, FAX 812-854-3805, Ms. Teresa Brough, Contracting Officer WEB: click here to download copy of RFP, http://www.crane.navy.mil. E-MAIL: click here to contact contracting officer via e-mail, pearson_d@crane.navy.mil. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This procurement is set-aside for small business concerns only. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. Solicitation Number N00164-98-Q-0192 is issued as a Request for Quotation. Solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 97-04 and Defense Acquisition Circular 91-13. The Standard Industrial Classification Code for this procurement is 3548. The size standard is 500 employees. This requirement is for the procurement of 1 each Ball Grid Array/Surface Mount Device Rework and Assembly Terminal, Air-Vac Engineering Company Model #DRS24C.2D, BRAND NAME OR EQUAL; 1 each Custom Work Station, Air-Vac Part Number AV961, BRAND NAME OR EQUAL; 1 each Solder Removal System, Air-Vac Part Number 1015.00.011, BRAND NAME OR EQUAL; 1 each Temperature Probe, Air-Vac Part Number 1012.02.011, BRAND NAME OR EQUAL, 1 each Multi-Media Package, Air-Vac Part Number 0024.27.010, BRAND NAME OR EQUAL, and 1 each Adapter, Air-Vac Part Number NSH1, BRAND NAME OR EQUAL. All above must be from the same manufacturer. Specifications for the system and accessories is as follows: The Ball Grid Array /Surface Mount Device Rework and Assembly Terminal must be capable of precision assembly and Ball Grid Array/Surface Mount Devices Rework (remove and replace) using interchangeable nozzles, computer controlled process control and development, and automated and semi-automated procedures. Process Control requirements at a minimum must contain: Embedded Pentium computer with a 17 inch SVGA monitor, keyboard and mouse; Windows 95 operating system with pre-installed control software including profile library; eight thermocouple channels; minimum 3 each K type thermocouples; real-time on-machine thermal profiling and data capture; non-contact IR temperature probe; sound card/speaker; air/gas closed loop flow control, programmable air/nitrogen toggle; process limits control; alarm sensing and display; system security; data logging, reporting, image and profile storing; adjustable thermal ramp rates; controlled 1000 watt top heater; profile library. Automation requirements at a minimum must contain Motorized Z-Axis; motorized vision movement; semi-automatic nozzle change; automatic pick-up/drop off, placement and removal; force measurement sensor. The Optical System requirements at a minimum must contain: Inspection quality stereo microscope with 6.4-40X zoom lens, 45-60 degree viewing angle; 2.0 inch square field of view; polarizing filer; Z axis LED sensor height control; built-in fiber optics; direct board level viewing capability; beam-splitter type vision system allowing top and bottom simultaneous viewing; multi-media high resolution color camera with 18-108mm zoom lens, PCI multi-media card image on image viewing on PC monitor, image capture and image disk storage. The carrier must contain a minimum of linear bearing carrier with fine X/Y adjustment; 18 inch minimum X 20 inch minimum D board capability; irregular board shape capability; adjustable board supports, spring loaded automatic heat expansion adjustment. Six standard nozzles will be included (nozzle sizes to be determined). Bottom side heater must be a minimum of 12 inches X minimum of 20 inch diffuser area, 4000 watts convection heater; two independent temperature control zones. Table -- Custom workstation with anti-static laminate, nozzle storage system, monitor stand, retractable keyboard holder. Site Solder Removal System -- Non-contact site solder removal system for pad preparation. Micro-Stencil -- Micro-stencil adapter to allow on machine stenciling site preparation. Service Connections -- Electrical 210-240 Vac, 50/60 Hz, single phase, 20 amp -- Air Supply -- 85 -- 90 PSI clean, dry air. Gas Supply -- 85 -- 90 PSI. This requirement will be negotiated at a firm fixed price contract and will be awarded utilizing Simplified Acquisition Procedures. The shipping terms will be F.O.B. destination, Naval Surface Warfare Center, Crane IN, with inspection/acceptance at destination. The required delivery is 6 weeks after contract issuance. FAR Clauses/Provisions 52.203-3 Gratuities, 52.212-1 Instructions to Offerors -- Commercial Items, 52.212-4 Contract Terms and Conditions -- Commercial Items, 52.212-5 Contract Terms and Conditions Required to Implement Statues or Executive Orders -- Commercial Items (incorporating FAR 52.203-6 Restrictions on Subcontractor Sales to the Government, with Alternate I, 52.219-8 Utilization of Small Business Concerns and Small Disadvantaged Business Concerns, 52.222-26 Equal Opportunity (E.O. 11246), 52.222-35 Affirmative Action for Special Disabled and Vietnam Era Veterans, 52.222-36 Affirmative Action for Handicapped Workers, 52.222-37 Employment Reports on Special Disabled Veterans and Veterans of the Vietnam Era, 52.225-18 European Community Sanctions for end Products) applies to this acquisition. DFARS 252-212-7001, Contract Terms & Conditions Required to Implement Statues or Executive Orders Applicable to Defense Acquisitions of Commercial Items (APR 1998), 252.225-7012, Preference for Certain Domestic Commodities and 252.227-7015 Technical Data -- Commercial Items apply to this acquisition. Offerors responding to this announcement must provide the information contained in 52.212-1, Instruction to Offerors -- Commercial items and must include a completed copy of provision 52.212-3, Offeror Representations and Certifications -- Commercial items. The offeror should also provide its Commercial and Government Entity (CAGE) Code, Contractor Establishment Code and Tax Identification Number. The Government intends to award to the responsible contractor whose quotation is the most advantageous to the Government considering price and price-related factors. The offers will be evaluated on the following factors: Technical specification compliance, past performance and price. Technical specification compliance and past performance are equal, and when taken together are significantly more important than price. The Contractor shall provide past performance for same/similar products/specifications with other Government Agencies, public or local Government for the past three years. If a change occurs in this requirement, only those offerors that respond to this announcement within the required time frame will be provided any changes/ amendments and considered for future discussions and/or award. All responsible sources may submit an offer which will be considered by the agency. Submit responses to Diane Pearson via fax at 812-854-3805 by 3:00 P.M. July 21. ***** Posted 07/02/98. (0183)

Loren Data Corp. http://www.ld.com (SYN# 0283 19980707\36-0001.SOL)