General Services Administration, Federal Supply Service (FSS), Tools and Appliances Commodity Center (6FE), 1500 East Bannister Road, Kansas City, MO 64131

51 -- HAND TOOLS; SHOVELS, SCOOPS, HOES, PICKS SOL 6FES-E2-980204-S DUE 081198 POC Ken McMullan, Procurement Analyst, Phone (703)555-1234, Fax (703)555-5678, Email ken.mcmullan@gsa.gov Steve L. Mosby, Contract Specialist, Phone (816) 823-1294, Fax (816) 926-3678, Email steve.mosby@gsa.gov, Alan M. Basler, Contract Specialist, Phone (816) 823-1297, Fax (816) 926-3678, Email alan.basler@gsa.gov WEB: Visit this URL for the latest information about this, http://159.142.150.114/cgi-bin/WebObjects/EPS?ActionCode=P&;ProjectID=6F ES-E2-980204-S&LocationID=7. E-MAIL: Steve Mosby, steve.mosby@gsa.gov. 1. 5120-00-243-2395 ESTIMATED PEAK MONTHLY REQUIREMENT (EPMR)1,410 MATTOCK ( PICK,WITHOUT HANDLE)DESCRIPTION: In accordance with Commercial Item Description A-A-315A, dated 01/05/88. size (pounds): 5 Exception(s) to Commercial Item Description: Table -- Dimension "A" delete "19-1/2 inches" and substitute "20 inches". See Technical Specifications paragraph(s): T2.2, T2.7, T3.1, T4.2, T5.1 and T6.2. 2. 5120-00-194-9458 ESTIMATED PEAK (EPMR)156 PICK, DIGGING (WITHOUT HANDLE)DESCRIPTION In accordance with commercial item description A-A-338A, dated 10/13/87. Size (pounds): 7.See Technical Specifications paragraph(s): T2.1, T2.7, T3.1, T4.2, T5.1 and T6.2. 3. 5120-00-224-9239 ESTIMATED PEAK(EPMR)138 RAKE, ROAD DESCRIPTION In accordance with GSA Purchase Description 5120-00-224-9239 dated 2/27/98. See Technical Specifications paragraph(s): T2.7, T3.1, T4.1, T6.1 and T7.1. 4. 5120-00-188-8446 ESTIMATED PEAK (EPMR) 432 SCOOP, HAND DESCRIPTION In accordance with Federal Specification GGG-S-326E, dated 8/14/96 Type: II. Scoop: Eastern pattern. Size: No. 4. Handle style: D Type. EXCEPTION(S) TO SPECIFICATION: Paragraph 3.4.2, forth line, delete "40" and substitute: "38". Table III, size no. 4. Width "A" minimum, delete "12-1/2" and substitute "12-1/4". Length "B" minimum, delete "16-1/4" and substitute "15-3/4". Paragraph 4.4.2.1, delete "175" to "176" and substitute "125" to "126". See Technical Specifications paragraph(s): T2.4, T2.7, T3.1, T4.3, T6.1 and T7.1. 5. 5120-00-188-8450 ESTIMATED PEAK(EPMR)1,434 SHOVEL, HAND DESCRIPTION In accordance with Federal Specification GGG-S-326E, dated 8/14/96 Type:IV -- Shovel, round point. Class:B -- long handle. Style:1 -- Open back. Size:No. 2. Blade length: 11-1/2 inches minimum, 12-1/2 inches maximum. Blade width: 9-1/2 inches minimum, 10-1/4 inches maximum. See Technical Specifications paragraph(s): T2.3, T2.7, T3.1, T4.3, T6.1 and T7.1. 6. 5120-00-224-9326 ESTIMATED PEAK (EPMR) 330 SHOVEL, HAND DESCRIPTION In accordance with Federal Specification GGG-S-326E, dated 8/14/96 Type:V (Square point).Class: A. Handle: D Type. Style:1 (Open back). Size: 2. Blade length: 11-1/2 inch minimum, 12-1/2 inch maximum. Blade width:9-1/2 inch minimum, 10-1/4 inch maximum. See Technical Specifications paragraph(s): T2.4, T2.5, T2.7, T3.1, T4.3, T6.1 and T7.1. 7. 5120-00-293-3330 ESTIMATED PEAK(EPMR) 1,260 SHOVEL, HAND DESCRIPTION In accordance with Federal Specification GGG-S-326E, dated 8/14/96 Type: V (square point). Class: B -- long handle. Style:1 -- Open back. Size: No. 2. Blade length: 11-1/2 inch minimum, 12-1/2 inch maximum. Blade width: 9-1/2 inch minimum, 10-1/4 inch maximum. EXCEPTION(S) TO SPECIFICATION: Table VIII, under lift, delete "29" and substitute: 28". See Technical Specifications paragraph(s): T2.3, T2.7, T3.1, T4.3, T6.1 and T7.1. 8. 5120-00-293-3332 ESTIMATED PEAK (EPMR)342 SHOVEL, HAND DESCRIPTION In accordance with Federal Specification GGG-S-326E, dated 8/14/96 Type:IV.Point:Round. Class: B -- Long handle. Style: 1 (Open back). Size No: 0. Blade length: 9-1/2 inch minimum, 10-1/2 inch maximum. Blade width: 7-3/4 inch minimum, 8-1/4 inch maximum. See Technical Specifications paragraph(s): T2.3, T2.7, T3.1,896 SHOVEL, HAND DESCRIPTION In accordance with Federal Specification GGG-S-326E, dated 8/14/96 Type: IV. Shovel: Round point. Class: A. Handle: D-Style. Style: 1. (Open back). Size: No. 2. Blade length: 11-1/2 inches minimum, 12-1/2 inches maximum. Blade width: 9-1/2 inches minimum, 10-1/4 inches maximum. EXCEPTION TO SPECIFICATION: Paragraph 3.4.2, fourth line, delete "40" and substitute "38". See Technical Specifications paragraph(s): T2.4, T2.7, T3.1, T4.3, T6.1 and T7.1.10. 5120-00-892-5319 ESTIMATED PEAK (EPMR) 2,112 SHOVEL, HAND DESCRIPTION In accordance with Federal Specification GGG-S-326E, dated 8/14/96 Type:XIV -- Snow shovel. Class: A -- Lightweight. Handle style: D Type. Blade size: 18 inches wide. Handle length (assembled): 28 inch minimum, 34 inch maximum. EXCEPTION(S) TO SPECIFICATION: The Class A and B snow shovels shall be completely assembled. Table XVIII, delete "0.050" and substitute "0.045". Height of blade, Table XVIII, delete "15" and substitute: "14-1/2". Table XVIII, first column, Handle length (assembled). Delete minimum 28 inches, maximum 34 inches and substitute: "34 inches minimum, 36-1/2 inches maximum". Paragraph 4.4.2.3.1 -- Change "130" to "40".See Technical specifications paragraph(s): T2.4, T2.6, T2.7, T3.1, T4.3, T6.1 and T7.1. 11. 5120-00-494-1863 ESTIMATED PEak (EPMR) 134 SHOVEL, HAND, SNOW DESCRIPTION: In accordance with Federal Specification GGG-S-326E, dated 8/14/96 Type: XIV -- Snow shovel. Class: B -- Medium weight. Handle Style:D Type. Blade width:17 inches minimum. Blade height:14 inches minimum. Weight:17 POUNDS MAXIMUM. EXCEPTION TO SPECIFICATION: Table XIX, delete "5 pounds" and substitute "4.9 pounds". Paragraph 4.4.2.3.1 -- Change "130" to "60". Table XIX, first column, Handle length (assembled). Delete minimum 32 inches, maximum 34 inches and substitute: "34 inches minimum 36-1/2 inches maximum". See Technical Specifications paragraph(s): T2.4, T2.6, T2.7, T3.1, T4.3, T6.1 and T7.1. 12. 5120-00-288-6529 ESTIMATED PEAK (EPMR) 1332 SNOW PUSHER DESCRIPTION In accordance with Federal Specification GGG-S-326E, dated 8/14/96 Type: XV -- Pusher (snow). Class: B Medium weight. Overall length: 55 inches minimum, 72 inches maximum. Blade width: 23-1/2 inches minimum, 24-1/2 inches maximum. Blade height: 10-1/2 inches minimum, 12-1/2 inches maximum.EXCEPTION TO SPECIFICATION: Paragraph 3.20.2, add at the end of the first sentence: "not less than 18 gage (0.0478) inch thickness". Table XXII, delete the "Minimum -- Maximum" weight requirement in its entirety. Table XXII, Overall length column, delete "55" inches minimum, "72" inches maximum and substitute, "53 inches minimum, "62-1/2" inches maximum. See Technical Specifications paragraph(s): T2.6, T2.7, T3.1, T4.3, T6.1 and T7.1. 13. 5120-00-293-2516 ESTIMATED PEAK (EPMR)180 SPADE DESCRIPTION In accordance with Federal Specification GGG-S-326E, dated 8/14/96 Type:X -- Spade, drain. Shank style:2 -- Solid Handle style:D Style. Blade length: 15-1/2 inches minimum, 16-1/2 inches maximum. Blade width:5-3/4 inches minimum, 6-3/8 inches maximum. Handle length: 26 inches minimum, 28 inches maximum. EXCEPTION TO SPECIFICATION: Table XIV, under gage of steel, delete "14" and substitute: "14 or 15".Table XIV, under handle, lift, delete "7-1/2" and substitute: "8-1/2". Table XIV, under blade, thickness, delete "0.0747" and substitute: "minimum .060 and maximum .085". See Technical Specifications paragraph(s): T2.4, T2.5, T2.7, T3.1, 4.3 and T6.1. 14. 5120-00-224-9328 ESTIMATED PEAK (EPMR) 180 SPADE DESCRIPTIONIn accordance with Federal Specification GGG-S-326E, dated 8/14/96 Type: IX. Style: 2 (Solid shank).Handle:D Type. Size: 14.Blade length:13-1/2 inches minimum, 14-1/2 inches maximum.Blade width: 6-1/2 inches minimum, 7-1/4 inches maximum. Handle length: 26 inches minimum, 29 inches maximum.EXCEPTION(S) TO SPECIFICATION:Table XIII, under gage of steel, delete "14" and substitute: "14 or 15".Table XIII, Size No. 14, under Blade Thickness, delete "0.0747" and substitute: "minimum .060 and maximum .085". See Technical Specifications paragraph(s): T2.4, T2.5, T2.7, T3.1, T4.3 and T6.1. 2 YEAR REQUIREMENTS TYPE CONTRACT WITH THREE ONE YEAR OPTIONS TO EXTEND. NOTICE TO PROCUREMENT RESTRICTION APPLIES TO ALL ITEMS. FAX REQUESTS FOR FURTHER INFORMATION (816) 926-3678. Posted 07/08/98. (0189)

Loren Data Corp. http://www.ld.com (SYN# 0355 19980710\51-0001.SOL)