NASA/George C. Marshall Space Flight Center, Procurement Office, Marshall Space Flight Center, AL 35812

66 -- STRESS ANALYSIS DATA SYSTEM SOL 8-1-8-02-C0065 POC Kimberly R. Day, Contract Specialist, Phone (256) 544-8999, Fax (256) 544-4080, Email kimberly.day@msfc.nasa.gov -- Teresa A. Foley, Contracting Officer, Phone (256) 544-0335, Fax (256) 544-4080, Email teresa.foley@msfc.nasa.gov WEB: Click here for the latest information about this notice, http://nais.nasa.gov/EPS/MSFC/date.html#8-1-8-02-C0065. E-MAIL: Kimberly R. Day, kimberly.day@msfc.nasa.gov. This notice is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This procurement is being conducted under the Simplified Acquisition Procedures (SAP). Stress Analysis Data System meeting the following minimum requirements. 1. Input Scanner. Each Scanner Must Function Independently. Accept A Variety Of Input Cards (Strain Gage, Lvdt, Thermocouple Rtd, High Level Inputs). Scan Rate: 1 Ms/Scan. Accepts Up To Four Input Cards. A/D Converter: 16 Bit (15-Bit Plus Sign). 19 Inch Rack Mount. 120 Vac Power. 2. High-Level Transducer Card. Differential Input Dc Volts. Measurement Range: +/- 1, +/- 2, +/- 5, +/- 10 Vdc. Resolution: +/- 30.5, +/- 61, +/- 152.5, +/- 305 Uv. Excitation Voltage: 0, 0.5, 1, 2, 5, 10 Vdc. Excitation Current: 250 Ma. Input Connectors: 9-Pin Sub-D Style. 3. Thermocouple Card. Input Types: J, K, T, E, R, S, B Software Selectable, Open Sensor Detection. Measurement Range: +/- 81.9 Mv. Resolution: 2.5 Uv. Input Connector 3-Pin Screw Terminal. 4. Strain Gage Card. Inputs: 120, 350, 1000 Ohm Quarter Bridge Strain Gages 60 To 5000 Ohm Half And Full Bridges Jumper Selectable Completion Resistors. Measurement Range (Strain Gage): Normal Range Mode +/-16,383 Ustraln. High Range Mode +/-163,830 Ustraln. Low Range Mode +/-1,638 Ustraln. Resolution Range (Strain Gage): Normal Range Mode 1 Ustraln. High Range Mode 10 Ustraln. Low Range Mode 0.1 Ustraln. Measurement Range (Strain Gage Based Transducer): Normal Range Mode +/- 8 Mv/V. High Range Mode +/- 80 Mv/V. Low Range Mode +/- 0.8 Mv/V. Resolution Range (Strain Gage Based Transducer): Normal Range Mode 0.5 Uv/V. High Range Mode 5.0 Uv/V. Low Range Mode 0.05 Uv/V. System Course Balance: 100 % Of Measurement Range. Excitation Voltage: 0,0.5,1,2,5,10 Vdc. Software Programmable. Calibration: Two ShuntCalibration Points. Switch Selectable. Software Programmable. Input Connectors: 9-Pin Sub-D Style. 5. Win 5000 Software And Interface Hardware. Windows Based. Autobalance. Shunt Calibration Of All Strain Gage Inputs. Data Can Be Exported To An Ascii Text Format. Displays Can Be Copied To The Windows Clipboard. Assignment Of Inputs Is Sensor Specific. Test Setup Can Be Saved For Future Use. Materials Parameters Can Be Specified For Use In Stress/Strain Relationships And Wheatstone Bridge Nonlinearity Correction. Acquisition/Reduction/Presentation: Data Reduction For Rosette Strain Gages. Conversion Of Principal Strains To Principal Stresses. Thermal Output Compensation. Wheatstone Bridge Nonlinerity Correction ransverse Sensitivity Correction. Thermocouple Linearization. Automatic Audit Trail. Scaling For Number Of Active Bridge Arms. Correction For Temperature Coefficient Of Gage Factor. Interface Hardware For Computer Interface. 6. Benchtop Cabinet. 7. Interface Cable (Standard Length). Cable To Interface Between Computer And Scanner. 8. Computer For System 5000 Stress Analysis Data System. Processor: Intel 266mhz Pentium Ii Processor With 512k Cache. Memory : 64 Mb Sdram Expandable To 348mb. Monitor: 21 Inch Color Monitor (High Resolution). Graphics Accelerator: Ati 4mb Agp Graphics Accelerator. Hard Drive: 6.4 Gb Ultra Ata Hard Drive. Floppy Drive: 3.5 Inch 1.44mb. Cd-Rom: 13x Min / 32x Max Cd-Rom. Multimedia Package: Sound Blaster 16x Sound Card And Boston. Acoustics Micromedia Speakers Network Card: 3com Pci 10/100 Twisted Pair Ethernet. Iomega Drive: Iomega Internal Zip Drive. Keyboard: 104+ Keyboard. Mouse: Ms Intellimouse. Operating System: Microsoft Windows 95 With Office 97. 9. Input Connectors. 9-Pin Sub-D Style Connectors The provisions and clauses in the RFQ are those in effect through FAC 97-04. This procurement is a total small business set-aside. See Note 1. The SIC code and the small business size standard for this procurement are 3679 and 500, respectively. The quoter shall state in their quotation their size status for this procurement. All qualified responsible business sources may submit a quotation which shall be considered by the agency. Delivery to Marshall Space Flight Center is required within 30 days ARO. Delivery shall be FOB Destination. The DPAS rating for this procurement is DO-C9. Quotations for the items(s) described above may be mailed or faxed to the identified point of contact by the date/time specified and include, solicitation number, FOB destination to this Center, proposed delivery schedule, discount/payment terms, warranty duration (if applicable), taxpayer identification number (TIN), identification of any special commercial terms, and be signed by an authorized company representative. Quoters are encouraged to use the Standard Form 1449, Solicitation/Contract/Order for Commercial Items form found at URL: http://procure.arc.nasa.gov/Acq/Standard_Forms/Index.html to submit a quotation. Quoters shall provide the information required by FAR 52.212-1 with the exception of (d), (h), and (i). If the end product(s) quoted is other than domestic end product(s) as defined in the clause entitled "Buy American Act -- Supplies," the quoter shall so state and shall list the country of origin. The Representations and Certifications required by FAR 52.2l2-3 may be obtained via the internet at URL: http://ec.msfc.nasa.gov/msfc/pub/reps_certs/sats/ FAR 52.212-4 is applicable. Addenda to FAR 52.212-4 are as follows: MSFC 52.211-90, MSFC 52.232-90, NFS 1852.246-71, FAR 52.204-4, 52.211-15 and 52.247-34. FAR 52.212-5 is applicable and the following identified clauses are incorporated by reference: 52.222-26, 52.222-35, 52.222-36, 52.222.37, and 52.225-3. Questions regarding this acquisition must be submitted in writing no later than July 17, 1998. Quotations are due by July 22, 1998 to the address specified above. Selection and award will be made (on an aggregate basis) to the lowest priced, technically acceptable quoter. Technical acceptability will be determined by information submitted by the quoter providing a description in sufficient detail to show that the product quoted meets the Government's requirement. Quoters must provide copies of the provision at 52.212-3, Offeror Representation and Certifications -- Commercial Items with their quote. See above for where to obtain copies of the form via the Internet. An ombudsman has been appointed -- See Internet Note "B". It is the quoter's responsibility to monitor this site for the release of amendments (if any). Potential quoters will be responsible for downloading their own copy of this combination synopsis/solicitation and amendments (if any). Posted 07/13/98 (D-SN222476). (0194)

Loren Data Corp. http://www.ld.com (SYN# 0360 19980715\66-0011.SOL)