U. S. Army Corps of Engineers, Omaha District, 215 North 17th Street, Omaha, NE 68102-4978

Y -- POL SLUDGE DISPOSAL AREA, SITE DP-03, POPE AFB, NORTH CAROLINA SOL DACA45-98-B-0060 DUE 082798 POC Contract Specialist: Mel Vogt, 402-221-4298 or John Denning 402-221-3895 WEB: Omaha District Contracting Division Homepage, http://ebs.nwo.army.mil/EBS/CONTRACT.HTM. E-MAIL: Mel Vogt or John Denning, Mel.E.Vogt@usace.army.mil or John.D.Denning@usace.army.mil. On or about 28 July 1998, this office will issue Invitation for Bids for the construction of POL Sludge Disposal Area, Site DP-03, Pope AFB, NC. Bids will be opened on or about 27 August 1998. This solicitation is unrestricted and open to both large and small business participation. Contractors interested in inspecting the site of the proposed work should contact the Mr. Robert Byrd, 43 CES/CEVP, 560 Interceptor Rd, Pope AFB, NC 28308-2314, telephone (910) 394-4194 FAX (910) 394-1911. The work will include the following; The scope of work for this project includes excavation of soil, implementation of runoff controls during excavation, staging of excavated soil, chemical analytical screening of soils to determine disposal fate, safety, health, and emergency response activities, dust control, hauling, and off-site treatment and/or disposal of approximately 900 CY of contaminated soils and all other excavated material to an approved waste disposal facility, backfilling of excavated areas, final grading, and a new chain link security fence. The Contractor is responsible for providing all analytical services, health and safety services, temporary facilities and related materials and equipment for the performance of the described work. All quantities are approximate. The estimated construction cost of this project is between $100,000 and $250,000. Standard Industry Classification (SIC) code is 1629. Contractor's Quality Control will be a requirement in this contract. Large business concerns submitting bids for services exceeding $500,000 or for construction exceeding $1,000,000, shall comply with Federal Acquisition Regulation 52.219-9 regarding the requirement for a subcontracting plan. The U.S. Army Corps of Engineers considers the following goals reasonable and achievable for fiscal year 1998: (a) Small Business: 61.2% of planned subcontracting dollars. (b) Small Disadvantaged Business: 9.1% of planned subcontracting dollars. (c) Women Owned Small Business: 4.5% of planned subcontracting dollars. The Contractor will be required to commence work within 10 days after notice to proceed and complete the work 45 calendar days after receipt of Notice to Proceed. Provisions will be included for liquidated damages in case of failure to complete the work in the time allowed. Performance and payment bonds will be required. Plans and Specifications will be provided free of charge. All requests for solicitation packages should be made in writing and no later than 14 days prior to bid opening. After such time, packages will be furnished if supply is available. It has been determined that the number of sets be limited to one (1) per firm. Ordering of plans and specifications shall be by written request or register on the Omaha District website: http://ebs.nwo.usace.army.mil/EBS/Contract.htm or faxed to (402) 221-4530 with the following information: 1) Name of Firm; 2) Point of Contact; 3) Mailing Address; 4) Street Address for Parcel Delivery Service; 5)Telephone and Fax Phone Numbers with Area Code (FAX numbers are mandatory to ensure the receipt of any amendments that may be faxed); 6) Level of Participation (General Contractor, Subcontractor, Supplier or Plan Room); and 7) Large Business, Small Business or Small Disadvantaged Business. If any of the information changes during the advertisement period, submit the information via e-mail to Mel.E.Vogt@usace.army.mil or John.D.Denning@usace.army.mil by written request or fax. Failure to provide the above information and any changes may cause a delay in receiving plans, specifications and amendments. Questions regarding the ordering of same should be made to: 402-221-4298. Telephone calls regarding Small Business matters should be made to: 402-221-4110. Telephone calls on contents of drawings and specifications should be made to Specification Section at: (402) 221-4411. Posted 07/15/98 (W-SN223436). (0196)

Loren Data Corp. http://www.ld.com (SYN# 0176 19980717\Y-0001.SOL)