|
COMMERCE BUSINESS DAILY ISSUE OF SEPTEMBER 10,1998 PSA#2177United States Park Police, Headquarters, 1100 Ohio Drive, SW,
Washington, DC 20024 23 -- 3 HORSE TRAILER WITH TACK ROOM SOL 1443PX396098310 DUE 092598
POC Contracting Officer, Gordon Nelson Smith Jr, 202/401-2264; Fax:
202/401-2262 E-MAIL: Gordon N Smith Jr, Contracting Officer,
gnsmith1@email.msn.com. 1. Description: 3 Horse Trailer converted to a
2 Horse Trailer allowing for extra stall width to include a six foot
dressing room. 2. Dimension: Inside width -minimum 80 inches; inside
height-minimum 90 inches; stall length-minimum 90 inches; head
space-minimum 42 inches; dressing room-minimum 72 inces. 3. Body & Roof
Construction: Roof & front panels constructed of aluminum skin; sides
& tailgate constructed of F.R.P. material. Double roof bows. Floor:
laminated oak ship lap floor minimum 1 1/2 inches thick. Interior dome
lights, minimum of (3), 12 volt w/protective len cover, one in front,
one in rear and one in dressing room. Escape Doors, (3), one on each
side minimum of 30 inches wide by minimum of 65 inches in height,
sliding bus type windows with screen and bar guards, stainless steel
piano hinge with 1/4 inch brass pin. Doors shall be hinged so as to
swing towards front of trailer. Doors shall be capable of full 180
degree swing, equipped with hold-open latches and have both interior
and exterior latching handles. One locking escape door on dressing room
and a locking door between stall area and dressing room. Install tie
ring above each escape door on interior of trailer. Nose Window, one in
front of trailer, awning type with screen and bar guard. Side Windows,
one on each side with screen and bar guards. Stall Divider, fully
padded F.R.P. board. Head divider, fully padded F.R.P. board. Rump
Bars, one on each side of trailer. Breast Bars, one on each side of
trailer, padded and capable of opening in both directions. The sides,
stall divider, and two swinging breast bars shall be padded.
Kickplates, on both sides and on stall divider. Stall Mats, minimum 3/4
inch thick solid rubber, full length of and width of stalls. Feed Bags,
two. Storm doors on back with windows. Full gravel guard around nose of
trailer and both fenders. Tailgate, sping assisted drop down ramp with
steel drop pin safeties. Tailgate shall be constructed of pressed 1/2
inch aluminum, F.R.P. material and one solid 3/4 inch minimum rubber
matting. Paint, shall be Dupont Imron (or equal) White in Color.
Wiring, shall be 14 gauge, color coded, enclosed in protective conduit.
Dressing Room carpeted throughout, to include two saddle racks and two
bridle hooks. 4. Chassis: Four wheel electric brakes. Reinforced
tongue for equalizers, minimum of 48 inches long. Coupler to fit 2 5/16
inch ball. Front jack stand fully retractable (crank down type). Safety
chains. Electric lights/brake hook-up connector 6 way. Undercoating
fenders and undercarriage. Exterior lights to conform to I.C.C.
lighting regulations. Tires, P335 X 15, 8 ply. Four on the ground and
one spare tire and wheel. Leaf Spring Suspension, 1 3/4 inch wide 4
leaf springs with 2200lbs capacity per spring. 5. Trailers shall be
delivered to the United States Park Police Property Office at 6th &
Penn Street, NE, Washington, D.C. 20002, Complete with capability of
off loading. 6. Silence of Specifications: The apparent silence of this
specification as to any details or the ommission from it of a detailed
description, conerning any point, shall be regarded as meaning that
only the best commercial practices are to prevail, and that only
materials and workmanship of first quality are to be used. All
interpretations of this specification shall be made upon the basis of
this statement. Posted 09/06/98 (W-SN246658). (0249) Loren Data Corp. http://www.ld.com (SYN# 0189 19980910\23-0002.SOL)
23 - Ground Effect Vehicles, Motor Vehicles, Trailers and Cycles Index Page
|
|